Dodge Cummins Diesel Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
69 Posts
Im assuming it hooks up to the Vp 44 like my fass. I ordered a few parts from a vulcan peformance with a snubber for the fuel pressure sensor. Call and talk to Eric, very helpful! Cost me about $20 shipped to my house.
 
  • Like
Reactions: tjthomas54

· Registered
Joined
·
206 Posts
i was needing mine in a hurry and on the cheap so i went to the local hardware store and bought a "T" and 2 barb fittings got under the hood right before the hose goes into the VP and cut the hose put my "T" in with a couple clamps holding it in place and screwed the fuel sensor from my edge into the 3rd port on the "T" and its been that way for bout 2 years now and havent seemed to have a problem.
 
  • Like
Reactions: tjthomas54
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top