Cummins Diesel Forum banner

6x18 SDX injectors help

2K views 2 replies 2 participants last post by  98p-pump 
#1 ·
I just put a new set of SDX 6x18s in my p-pumped 24v it ran fine for about 5min then started cutting out, it wont idle just dies:banghead:. anybody had similar experiences of have any ideas?
 
#2 ·
air in the lines? crack the injectors and turn the motor over until you see fuel, then tighten them back down.
 
#3 ·
Its not air in the lines I bled them when i put them back on, it ran smooth for about 5 minutes then it started cutting out bad.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top