Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Cummins of the Month Challenge!
1 - 5 of 5 Posts

·
Registered
Joined
·
635 Posts
Discussion Starter · #1 ·
has anyone pushed a 66mm to 1000hp and it held up, im shooting for close to 800 on fuel, and with a little spray im hopeing to get closer to 1000, i talked with chris alot, and he said run a external wastegate and it should be possible, just trying to see if anyone has done it
 

·
Registered
Joined
·
140 Posts
i know 500 is possible with a 64, but a 66 may get 650, and 850 or so with spray. 1100 has been done with a 74 on a 03 CR. i would try a 68 or 70, would get ya pretty close with enough spray
 

·
Registered
Joined
·
140 Posts
been done. single 66 and 3 stages on a VP truck on the left coast.
3 stages! holy, that seems like a bit much, im thinking 800 is not possible on fuel then if he needs 3 stages to get 1000, probably something closer to 650-700 on fuel with plenty of fuel left over for nitrous and lots of wastegating to keep the turbo from overspeeding unless its a real big A/R
 
1 - 5 of 5 Posts
Top