[Smourj21]

My bro put his 2006 CR on the mustang dyno at Schides and i was impressed at the torque! Let me know what you think here are the mods:

HTT 62/12
Industrial injection CP3 Bag of parts
DDP 90's
Dual Feed Line
CAI
4" Dual exhaust
Fass
Edge Juice with attitude
Freshly Rebuilt 48RE
ATS 5 star torque converter
ATS Valve Body and Flex Plate

Everyone with similar HP # around 400 were putting down 800-950tq the only thing i can think of that would put these kind of tq numbers down is the fact that it has a rebuilt trans, and new tq converter...but i cant believe out of all the trucks there someone there didn't have a built auto or heavy duty clutch. i dont know im dumbfounded!

This would explain why when it hits OD the truck takes off like it got a shot of nitrous. It is also a very clean running truck

 

[Cummins6speed]

The rebuilt trans helps and OD will net you more torque

 

[Taquache]

good numbers!

the HP seems a little low though

I just put down 445 yesterday with only a predator in my 07

 

[jakethesnake]

a very close friend of mine, drew scheiderer took second on the mustang dyno saturday with 539 and something around 1200 (not exact on that tq) with his 06 common rail i thought the numbers were low for the trucks mods... his truck consists dual pumps, ddp 90's silver bullet 66 smarty tnt r/tst PM built auto and all the supporting stuff

 

[Timmay81]

id say HP numbers were down 70-100 horse than they should of been. We put our 6.7 scorpion on there and it was down almost 80hp vs the dyno a few days before on a superflow.
our race truck only did like 5xx on the mustang and almost fell off the dyno, they really need to strap those down better. should of went on the mobile dyno jet

 

[m5b6l]

yea that seems really low i put down 430hp with my setup now on a tow behind dyno and i have a pretty bad exhaust leak between my top turbo and hot pipe. which im getting fixed this weekend and im going to re dyno. but those torque numbers are really high for the horse power numbers. and that is a sick looking truck

 

[Taquache]

we dyno'd a stock 2011 ford 6.7 yesterday also and it put down around 370 HP

 

[Smourj21]

This was the first run, it was 428/1100

 

[Timmay81]

we dyno'd a stock 2011 ford 6.7 yesterday also and it put down around 370 HP

which dyno? i havent seen a stock scorpion do over 310-320 yet

 

[Taquache]

dynojet, inertia dyno

 

[Timmay81]

thats pretty damn good for bone stock, most are 310 range. ours does 460 on our dyno but of course its not stock

 

[Taquache]

can't wait to start seeing the tunes come out for the 6.7 we had about 5 or so 08 strokes dyno and all of them were above 520HP

 

[partyshortbusdriver]

These dynos are hard dynos to run. On most other dynos the trucks will lay down more power.

You guys should see #2gunsmoke's hp curve from dunbars dyno. Almost a straight line from like 75mph to 122mph, never seen anything like it before.

 

[Taquache]

anyway sorry for the hijack :w:

 

[Timmay81]

can't wait to start seeing the tunes come out for the 6.7 we had about 5 or so 08 strokes dyno and all of them were above 520HP

yea they are a beast thats for sure

 

[m5b6l]

yea they are a beast thats for sure

yea but i herd powerstrokes run their best right before they die