Cummins Diesel Forum banner

3rd gen coils and spacers

1009 Views 11 Replies 4 Participants Last post by  colton3
Got a friend with stock 06 coils and 3 inch coil spacers. I want to go back to closer to stock height. Will his coil springs work on my 97 and his spacers?
1 - 3 of 12 Posts
Yes they will fit, however your ride will suck. The 3rd gen coils have a higher spring rate so it will be a rough ride.
The 3rd gen is heavier so the spring rate is higher. If you put them in a lighter truck the spring rate is too high. I would probably compare it to driving a 1st gen as far as bone jarring ride.

You could try locating some PowerWagon springs...or give one of the big guys a call... Thuren or Carli. They will get you set up for what you need.
Gotcha. You could always just give them a go and if you don't like them just resell them
1 - 3 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.