Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Cummins of the Month Challenge!
1 - 20 of 1139 Posts

·
Registered
Joined
·
630 Posts
Discussion Starter · #1 ·
Waiting for my coils from Lorenz but in the meantime I'm seriously thinking 37" tires. If you have pics of yours or someone else's please post a pic. Tire I have in consideration is the Goodyear MT/R on my stock rims.:thumbsup
 

·
Registered
Joined
·
630 Posts
Discussion Starter · #3 ·
Killer truck.:thumbsup Don't know how much more you could add to that:lol3:
 

·
Registered
Joined
·
167 Posts
Now thats a good looking truck man!!
 

·
EAST TEXAS VP
Joined
·
3,432 Posts
Thanks for the compliments guys, but I am in the process of getting rid of all the chrome, and finishing up the lift. So, there is always more to do, and it is a work in progress!!:$::thud:
 

·
Registered
Joined
·
308 Posts
Waiting for my coils from Lorenz but in the meantime I'm seriously thinking 37" tires. If you have pics of yours or someone else's please post a pic. Tire I have in consideration is the Goodyear MT/R on my stock rims.:thumbsup
I have a 6" lift and my 37s still rub a little when I turn right. I'm not saying it's not possible but I would love to see the pics. :popcorn:
 

·
Registered
Joined
·
381 Posts
Here ya go - I ran this setup for 4500 miles during the winter. It's a Lorenz 2.25 kit w/ DP Leafs out back & 37in Goodyear MTRs. Zero Rubbing and it was used extremely hard all winter. Just make sure you use a true 12.5in wide tire & stock rims :thumbsup

Good luck and post pics when you're all done! :beer



 

·
Registered
Joined
·
45 Posts
Rize Kit

Thanks for the compliments guys, but I am in the process of getting rid of all the chrome, and finishing up the lift. So, there is always more to do, and it is a work in progress!!:$::thud:
I have a Qwk question how do you like your lift kit? I am in the process of laying down some cash for that same kit, I not too crazy about going with 8" lift but 37 or 38 inch tires well it seem like a must.I was told Rize was a good lift kit. Any input would be helpful before the first payment goes down.:$:
 

·
TECH SPECIALIST
Joined
·
1,792 Posts
3" lift and 37's is very doo able.. heck i ran 35's and no lift forever...If you use stock rims or rims with the equivilant backspacing you won't have any troubles.. I know of atleast four people doing it... Unfortunately I don't have any pics becasue I was banned from that site!!:w::rof
 

·
Registered
Joined
·
45 Posts
I won't use stock rims, so that will not work once you change your rims proper offset and larger tires will affect the fit.I want to go with 20" rims possible Weld Racing 20x10 with 37" or 38"
 

·
EAST TEXAS VP
Joined
·
3,432 Posts
I have a Qwk question how do you like your lift kit? I am in the process of laying down some cash for that same kit, I not too crazy about going with 8" lift but 37 or 38 inch tires well it seem like a must.I was told Rize was a good lift kit. Any input would be helpful before the first payment goes down.:$:
I really like the kit, and you wont be disappointed. The truck rides really good, and I am hoping to add the King Coil Overs and shocks in the future.:hyper: Once thats done, it will ride even better. PM me if you have any more question, and I will be glad to help you out.:thumbsup
 

·
Registered
Joined
·
17 Posts
I have Lorenz's 2.25 SAW with the DP's in the rear and it's fantastic. I have 35x12.5 MTs right now and there is a ton of room for more tire.
 
  • Like
Reactions: ChickenKing

·
Registered
Joined
·
630 Posts
Discussion Starter · #13 ·
Here ya go - I ran this setup for 4500 miles during the winter. It's a Lorenz 2.25 kit w/ DP Leafs out back & 37in Goodyear MTRs. Zero Rubbing and it was used extremely hard all winter. Just make sure you use a true 12.5in wide tire & stock rims :thumbsup

Good luck and post pics when you're all done! :beer



Those are the exact tires I was thinking about. I have the Lorenz 5100 System to install as soon as the coils get here but will eventually step up to the SAW 2.25 Kit. :woot:
 

·
Registered
Joined
·
232 Posts
hey has any one have pics of 6" with 35" tires or seen it and will it look ok
 

·
Registered
Joined
·
667 Posts
3" lift and 37's is very doo able.. heck i ran 35's and no lift forever...If you use stock rims or rims with the equivilant backspacing you won't have any troubles.. I know of atleast four people doing it... Unfortunately I don't have any pics becasue I was banned from that site!! :w::rof

When the hell did that happen and why?
 

·
Registered
Joined
·
1,654 Posts
Heres mine, close...(4" lift, 37s)
Only rub is on the control arms at full lock, but thats because of the wheel backspacing. I have a set of H2s waiting for me to get off my butt and bore out the hub hole though....

 
  • Like
Reactions: 6=8

·
TECH SPECIALIST
Joined
·
1,792 Posts
When the hell did that happen and why?
Long story but it pretty much came down to I wasn't posting about what they wanted to hear...
 

·
Registered
Joined
·
1,654 Posts
Long story but it pretty much came down to I wasn't posting about what they wanted to hear...
LOL, I guess you arent a good little sheep like most of the rest, huh?

Seems to have more ghestapo morderating everytime I glance over there....
 

·
Registered
Joined
·
1,381 Posts
20x10 diamo 16 karat 35x1250x20 dick cepek mud country
stock very close to rubbing
 

·
TECH SPECIALIST
Joined
·
1,792 Posts
LOL, I guess you arent a good little sheep like most of the rest, huh?

Seems to have more ghestapo morderating everytime I glance over there....
LMAO!!!!!:rof:thumbsup
 
1 - 20 of 1139 Posts
Top