[kwag707]

Would a 2nd gen manifold and turbo work on a 6.7. I have a buddy with a silver bullet on his 02. he is wanting to get rid of it. Would it work on my truck??? If so what are the advantages and disadvantages in comparison to a 3rd gens. What would need to be changed. Just the down pipe and the tube from the turbo to intercooler???

 

[Shibbyutman]

It would not work without changing the manifold and turbo. Even then, the turbo on a second gen is between cyls 3-4 right in the middle of the motor where on the common rail engines it is between 4-5. At a minimum you'd need a new downpipe and intercooler tube, and I'm pretty sure the oil drains and feed lines need to be changed too.

 

[RAN '[email protected]]

It would not work without changing the manifold and turbo. Even then, the turbo on a second gen is between cyls 3-4 right in the middle of the motor where on the common rail engines it is between 4-5. At a minimum you'd need a new downpipe and intercooler tube, and I'm pretty sure the oil drains and feed lines need to be changed too.

All correct, and you would have 2 vent the ccv to the atmosphere. I was looking into this till I decided on twins.:thumbsup: