Dodge Cummins Diesel Forum banner
1 - 18 of 18 Posts

· Premium Member
Joined
·
890 Posts
Discussion Starter · #1 ·
Hey guys i need some quick suggestions i just sent my II 90hps to Brady at II to get them flow tested and i was gonna have him upgrade them to 125hps now do you think id be ok with my Silver64 for now.. Down the road an not anytime soon ill be doin a set of twins but for now ill be sticking with my 64... Thanks guys Shawn
 

· Registered
Joined
·
587 Posts
I run flux 2.5's which are 125's with a silver 62 and my EGT's stay pretty low. Max out at about 1450 at 120+.
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #4 ·
Very good to know :thumbsup: Thanks guys...
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #6 ·
I run Flux 3's with a 64 and things stay below 1450* with the Smarty and Pressure box.
Nice im getting pretty excited now :party018: Hows your Rail Pressure running the Flux 3's with a stock Cp3???
 

· Registered
Joined
·
4,129 Posts
27k., But I think the EZ is causing those of RP. Doubt a stock pump can hold that much RP and it only dips to 11k and then rises so fast. UNLESS I DON'T HAVE FLUX 3's, who knows. But without any tuning I made 3 consecutive runs 598 with stock pump and no timing.
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #8 ·
27k., But I think the EZ is causing those of RP. Doubt a stock pump can hold that much RP and it only dips to 11k and then rises so fast. UNLESS I DON'T HAVE FLUX 3's, who knows. But without any tuning I made 3 consecutive runs 598 with stock pump and no timing.
Yea i was reading that one thread you were posting on about your recent dyno runs and they are pretty impressive :thumbsup:.. I have been dealing with sorta the same problem im not 100% positive mine are 90hps.. With everything in my sig. last saturday out of 20 runs the best i made was 551.2hp and 1039.7tq :confused013:Thats why they went to II to get checked over :thumbsup:
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #9 ·
Well after talking to Brady today i found out that my injectors were not 90hps :banghead:
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #13 ·
what were they 50hp stixs
They flowed close to 50hp im gonna have Brady fax me over the flow charts as im very concerned why i only got 50hps when i asked and paid for 90hps
 

· Premium Member
Joined
·
890 Posts
Discussion Starter · #15 ·
yeah that would make me mad did u get them through II
Nope i bought them through an II dealer.. Told them i wanted II 90hps and for the past year i thought thats wat i had but after having some performance issues and never recieving a reciept from them i broke down and sent them to II to get them flow tested.. Just costed me another $900 to get wat i wanted.. :banghead:
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top