Dodge Cummins Diesel Forum banner
1 - 1 of 25 Posts

· Registered
60 Posts
it's a bolt-on job. you need a straight pipe that replaces the piece of exhaust that houses the DPF and a fooler box. You want to put a replacement 4" downpipe on as well (also bolt-on, no welding involved). It will take you 3-4 hours if you know that righty is in fact tighty. the minimum you will need to delete the DPF is ~$1050 from BADP. It includes the 4" delete pipe, the 4" downpipe, and the code-free fooler box. For another $60 you can get the EGR delete plates from K2 Diesel Performance here on this forum. Those will throw a CEL and you can choose to either ignore it until a code-free EGR delete is released or buy an Edge Juice w/Attitude ($800) or Bully Dog PMT ($1000) to clear the codes.
Isn't this wonderful - you have to spend 50 grand on a friggen truck then dump 3 grand more + labor on crap just so you can drive it and not have to sit at the dealer dealing with idiots WTF is wrong with this picture?
1 - 1 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.