[BroncoHound]

it's a bolt-on job. you need a straight pipe that replaces the piece of exhaust that houses the DPF and a fooler box. You want to put a replacement 4" downpipe on as well (also bolt-on, no welding involved). It will take you 3-4 hours if you know that righty is in fact tighty. the minimum you will need to delete the DPF is ~$1050 from BADP. It includes the 4" delete pipe, the 4" downpipe, and the code-free fooler box. For another $60 you can get the EGR delete plates from K2 Diesel Performance here on this forum. Those will throw a CEL and you can choose to either ignore it until a code-free EGR delete is released or buy an Edge Juice w/Attitude ($800) or Bully Dog PMT ($1000) to clear the codes.

 

[BroncoHound]

Thanks bronco! It seems as though the dpf and egr delete puts new life into the 6.7L. I'm assuming both deletes can be reversed. I was looking at edge products and found the edge Insight. It simply plugs in with no hp or torque increase potential. Would this cheaper Insight erase the soft codes just as attitude with juice? Thanks fellas! Where do you find H&S dpf delete on the internet to order? I've found BADP dpf delte and plates for egr.

Here is a link to the PDI, which is the distributor for H&S. However, i no longer see the H&S kits listed on their website. You might want to give them a call and figure out what the deal is if you are interested in an H&S kit: Performance Diesel Inc - 07.5 Cummins 6.7L

NOTE: the H&S modules currently are not code-free. they still throw a soft code like the Gen 1 BADP kits do. The price of $1050 i quoted in the above post is for the Gen 2 code free BADP kit. Their Gen 1 kit is somewhere in the $900 range whereas the H&S Gen 1 kit is around $700 if i remember correctly.

Both the DPF and EGR deletes can be reversed in about the same amount of time it took to install it all. It's all plug-n-play.

 

[BroncoHound]

Will the edge Insight remove soft codes just at the edge attitude with juice?

The insight has the ability to read and clear codes but it cannot be programmed to automatically clear codes before startup like the Juice w/Attitude and PMT can.