Cummins Diesel Forum banner

03 dodge ram 5.9 cummins no start

2009 Views 11 Replies 4 Participants Last post by  gcon4418
I blew a power steering hose , cleaned up the mess replaced the hose, driving down the road, truck revs up to about 3grand and dies the truck will not start. I have replaced the fuel filter, fuel pressure regulator and new batteries still no start , took to dodge dealer cause I had a p2509 my mechanic buddy said computer maybe needed to be flashed , dodge mechanic said computer is good and needed to do a fuel test , lift pump good, injector pump good but I only had 149 psi at rail he checked the fuel pressure relief valve it was bypassing like crazy, he says I needed a new one put new one on fuel pressure at rail is no 500 psi but still no start , now he is testing the injectors.....anyone else been through this any ideas.....
1 - 1 of 12 Posts
Any water in fuel? Any corrosion in injectors, feed tubes or CP3?

A quality water separator/fuel filter in the canister would have stopped all that krap. Baldwin PF7977 5 micron in the canister asap

Lots of the junke out there on the market lets 10 micron thru which will kill injectors and has NO water separating capability.
  • Like
Reactions: 1
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.