Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. 2013-2018 Non-Powertrain
    I am stumped and I am hoping that I can get some answers here. I have a 2014 3500 that has a lot of aftermarket stuff done to it. I got into an accident (body damage, nothing motor wise) so the body shop guy is denying any of it to be his issues. The day I got my truck out of body shop, it went...
  2. 4th Gen Cab & Chassis
    I bought a 2011 Ram 3500 6.7l C&C Flood Damage truck as a project. When I first brought the truck home it was completely dead, no power to anything, I’ve replaced the TIPM, ECM, WIN Module, Starter, New Injectors and Crossover Tubes, New Turbo and Actuator, Camshaft Position sensor and adjusted...
  3. 3rd Gen. Performance Parts Discussion
    Just replaced top cp3 from ATS twin fueler kit since old one decided to shred itself. Put new cp3 in and hooked up all correct lines and plugs for FCA/FR-PS. Primed system 4 times and cranked it over. Started up really rough with a giant chop. Eventually turned itself off after chopping for a...
  4. 94-98 Powertrain
    Hello, first thank you for taking the time to help me out. I’m going to try to remember to list everything I’ve checked/done so far. im in Kansas, and the weather dropped down to -8 so far. Normally in the summer, my truck fires up immediately, if I tap the pedal. If I don’t it takes an extra...
  5. 3rd Gen. Powertrain
    Hello everyone, I have a 2006 Dodge Ram 2500 mega cab that I was bringing home from the paint shop. Before we left we could not get it started so we replaced one of the battery's and it started right up. I was almost able to make it home until I started losing voltage luckily I was...
  6. 07.5 - 09 3rd Gen 6.7L Powertrain
    Hey guys I'm new to the forum but I have alot of questions. I have 07.5 6.7 I blew a motor in (run hot). I swapped out with 08 motor same every thing. Problem is I'm showing codes p0202-P0206 all injectors 2 through 6 circuit stuck open and P0340 Cam position sensor bank1 sensor1. I've changed...
  7. 98.5-02 Powertrain
    Any help would be appreciated. I've had my 99 second gen Dodge for about 15 years. This year the wait to start light started delaying to come on by maybe 6 seconds. The truck will not start until the wait to start light comes on. It will just crank. Anyone have any ideas on what I need to replace?
  8. 07.5 - 09 3rd Gen 6.7L Powertrain
    07 6.7 when I his issue happened the first time ECM went out. So I replaced with tunes from PELA Motosports and now the truck is doing the same thing. WIF light cycles on dash with operation of lift pump truck will fire for a second then die. Now I have no WIF light, and battery bolt isn’t on...
  9. 98.5-02 Powertrain
    So I have a 99 and I just got done swapping the 2001 engine. I’m using the same wiring harness that was in the truck and the ecm! I just realized that the 2001 doesn’t have time crank sensor at this point I don’t know what to do. it’s not starting and the dash says no bus!
1-9 of 9 Results
Top