Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 31 Results
  1. 98.5-02 Performance Parts Discussion
    I have a almost brand new s364 sxe (64.5/73/14) and was wondering if it is a good turbo to tow with, that being said, I plan on putting 100hp injectors and head studs with it as well. Truck has edge comp drag box and is stock other than that. Truck is a 2002 3500 with an nv4500 transmission...
  2. 98.5-02 Powertrain
    So about 2 months ago my truck went into anti theft mode “I’m assuming” when I got in it to go to work one morning the horn started honking and the lights started flashing it ran for about 10 or so seconds then cut off. So assuming the anti theft sent my truck into limp mode “I guess” but then I...
  3. 98.5-02 Non-Powertrain
    OK replaced vp44 & ecm. New filters good pressure. New lift pump. Now experiencing dead pedal intermittently. Code 1693 stays set in odometer. Can't seem to reset. DTC in ECU says "No Comm between Vp44 and CM551" not always set but sometimes. Can the TPS be the problem? Would it not throw a...
  4. 98.5-02 Powertrain
    I have a 1999 dodge 2500 2wd automatic that has 95k miles. The truck will start up just fine and crank just fine and idle just fine but won’t go over 10 mph or rev over 1400 rpm. I’ve been looking for a solid week for help or someone with the same issue that actually has a resolution to the...
  5. 98.5-02 Performance Parts Discussion
    Hi, I have a 2001 Dodge 2500 cummins. It currently has a 47re trans and i'm swapping that to a NV4500 5 speed. I was wondering if anyone has had to switch their VP44 to the manual option. I believe it is considered the HO VP44. The reason why i'm asking is because I added a bunch of aftermarket...
  6. 98.5-02 Powertrain
    Hello guys I’m chasing a very annoying issue here with my truck Sorry for the long post It’s a 2001 Ram 2500 24Valve HO So I bought this truck not very long ago and I’m having a hard starting problem after letting the truck sit for 5+ hours or over night. I only noticed the issue after parking...
  7. 98.5-02 Powertrain
    First post here but I’ve looked on here for a couple years now on tips and info. -So first off will say VP44 was replaced 9 months ago. For the past couple months I’ve had a fuel leak from somewhere under the hood. Small leak but it would end up on the firewall & on the return line Tee. The...
  8. 98.5-02 Powertrain
    Hi guys, I got a 2000 Ram 5.9 Cummins 5 speed. When starting it in the morning it runs great for about 5 minutes then she starts to run rough. Idles between 800rpm to 1000rpm up and down. I noticed it does it also when the grid heater comes on and lights will dim and volts go up and down. Also...
  9. 98.5-02 Powertrain
    Thank y'all for many years of help and info especially y'all big contributors. My 02 has been having dead pedal at start, while hauling at less than 2k rpm and other occasions. At first sign 8 months ago I received the P0216 code. I changed to an in tank lift pump, Delphi or whatever it was the...
  10. 98.5-02 Powertrain
    02 2500 5 speed bone stock Farm truck drove to a field the other morning, come dark it would crank but not fire, pulled it down the road and bump started it by letting the clutch out, drove home as if all was normal. Being a cold and wet change of the year here in Canada I went ahead and...
  11. 98.5-02 Powertrain
    Longest nightmare of my life (so far) 2001 ram 2500, 100hp injectors, Fass 150, motor work, head work, slightly oversized turbo (hx35), studded, 4-5 inch exhaust- v-band downpipe, running a smarty s03 Truck was stolen and recovered in mid 2020, all electronics were ripped out (gauges, tuner...
  12. 98.5-02 Powertrain
    Looking for help as I’m running out of ideas. Just recently started experiencing a new problem out of no where and all diags I’ve done led me no where. At the end of driving about 300 miles a few days ago I was cruising in the highway at 60ish mph and felt one single buck. I figured I just hit a...
  13. 911 Urgent Situations
    Hello all, I’m in a huge time crunch at the moment and could really use help, A bit of my background, I’ve owned at 93 and 95 12V, a 08, 09 and 10 6.7 and now own a 98.5 24V. the current truck 98.5 24V ran out of fuel one day and I’m assuming killed the fuel pump and VP44, I replaced the fuel...
  14. 98.5-02 Performance Parts Discussion
    Hey guys i need some help with some fuel pressure issues. I have a Fass 150gph pump on the truck and I looked at the lift pump under the original fuel filer that's on the driver side of the block. on start up it has about 5-6 psi and when it's warmed up it just goes up to about 6-8 psi. I know...
  15. 98.5-02 Non-Powertrain
    This writeup was done by a fellow Cummins forum member, but being buried in the 12v section. i doubt any one would find it while searching the web for a solution to the vp44 stock lift pump problem, so i thought it would be good to give it a bit of a bump , it may be overkill for stock- close to...
  16. 98.5-02 Powertrain
    Howdy all, was at a big car show today, and did a big burnout, at the end of the burnout, the truck shut off, wouldn’t start. It got hot but not out of the comfort zone. I’m having ecm problems (wts light refuses to come on anymore and weird starting) I put some fuel in the truck, bled the...
  17. 98.5-02 Performance Parts Discussion
    I might have put this in the wrong forum so ahead of time my bad I’m new to the site… but I’m stuck on rather just getting a new vp44 or a fass pump (my problem) I was driving and the truck and it started misfiring (like it was 2-stepping) pulled over turned it off n on, and saw my fuel...
  18. 98.5-02 Powertrain
    2002 2500 5.9 24V Cummins auto trans 375k miles bone stock Truck was running great no issues one day was driving went about 20 miles and the truck completely died. Couldn’t get it to turn over, gave it a tiny shot of ether and it turned over. Ran about another 10 miles and it died again...
  19. 98.5-02 Powertrain
    My truck started to cut out during a cross-country trip while into the pedal to complete passes or climb hills. I rarely floor my truck, and it's stock except for an AEM intake and a Diamond Eye 4" turbo-back system with a muffler. I don't hammer on this thing at all. SITUATION: February...
  20. 98.5-02 Powertrain
    I have a 99 automatic I put a new head and studs on it and 75hp injector but it will only run on 1 and 6 cylinders. So far I have put a new fass 165 New vp44 and New cummins cross over tubes and I have but a break out box on it as well but through everything still only 1 and 6 are running is it...
1-20 of 31 Results
Top