Search Results for ‘turbo actuator’

So my 2017 6.7 has a U010C code I had 12v on power, good ground, and 2.5 volts on CAN BUS wires. Ultimately sending me to the VGT actuator replacement. Come to find out I had a known good actuator in my toolbox. would it be possible to put a used one on my turbo? and go through the calibration...

Evening everyone. I have a 2015 2500 4x4 with 215K. I keep my services done religiously so I believe my internals are still in great shape. From my research so far it looks like my turbo actuator is/will go out shortly. I am debating on replacing the turbo completely or just replacing the...

So I’ve searched quite a bit and haven’t found this exact scenario. Have. 2012 ram 3500 with a catastrophic failure of the old engine so I swapped a complete junk yard engine in, turbo and all and kept my pcm. Left all the emissions in tact this go around. At random times I will notice a decent...

2007.5 6.7, delete, race me pro tune. I’m a little stumped on this… literally bought this truck 2 weeks ago (private sale) drove the truck 3 hours home with no issues. After a week the truck started randomly turning on the exhaust brake. Didn’t matter what I was doing it would just randomly...

Thinking the turbo went out on my 2017. Only code I get is for the learn limit being exceeded. On my edge ct3 the vgt pos is stuck at 50 and won't and doesn't move. Wondering if that would be just the actuator, or if it would be the veins being stuck. I also found someone of market place is...

I have a bone stock 2014 ram 2500 Laramie with 182,000 miles on it. Check engine light is on and reading codes P003A and P2262 with no exhaust brake. Dealership says I need a new turbo actuator and possibly a new turbo(to be determined on removal). For just the actuator it will cost $4000 or...

Has anyone installed or had installed a City Diesel Upgrade Actuator on their truck? I am throwing codes that are related to a bad current actuator. citydiesel.net Thanks.

Driving down the highway the other day my check engine lights started dinging. I put a code reader on and here are the codes that popped up. P00af, P023a, P0446, P0601,U0001. My truck is a 2014 Ram 2500 with 96,000 miles and about 30m of that towing a 5th wheel. A friend said it sounds like...

I have had the trucks egr cooler got a Crack (obviously lol)

I have a 2016 tuned and modified with the stock turbo and started having issues with my eb last year. I have full boost, no excessive smoke and no cels. The truck runs great other than the eb not working. Any ideas where to look?

Hey yall, I had some turbo actuator codes pop up on 2015 ram 2500. The codes were P003A, P00AF, and U010C. When my CEL came on, I stopped and shut the truck off to run the DTC. After running I turned my truck back on and drove it the last few miles to my destination. During the drive I noticed...

2011 ram 2500 deleted and tuned I installed a reman turbo with pre calibrated actuator 2 days ago. The truck drives better but the exhaust brake doesn't work I feel like the actuator isn't moving at all due to the truck seems limited at the top end. My original turbo actuator burnt up on the...

Hey all, I had my stock VGT turbo go out on me the other day. I spoke with BD diesel about their non VGT iron horn kits and purchased a 364 80 by .91 for my replacement. I was told it would be upwards of 3 weeks before I got it but it showed up in 4 days… (hurray for that, but now my timeframes...

I have a 2013 6.7 it’s a manual if that’s important. On my way to work the CEL came on didn’t have time to check it until after work. Drove to O’Reillys and the codes that came up were P0046 and U010C. The turbo still spools but I can only get about 10 pounds of boost and the exhaust break works...

I ordered a new turbo with actuator already installed from USDieselparts, due to the previous turbo actuator being stuck open when the truck would turn on and only turning off when I disconnected the actuator. My only question is will I have to get the turbo actuator reprogrammed or how does it...

My 2015 2500 80K miles just started getting these codes P003A and U010C, no other codes. The truck drives fine, I have boost, it accelerates like it always has, MPG is the same, I have exhaust brake it seems to work like it always has, although I might be a little less strong, hard to say on...