Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. 3rd Gen. Performance Parts Discussion
    So I'm having a heck of a time trying to decide on who I want to go with for a custom tune. Figured I'd make a little poll and see what you all think! I'll also give you the info on my truck and what my plans are with it... Whoever I get to write the tune, I'm fairly confident I'm going to get...
  2. 03 - 07 3rd Gen 5.9 Liter General Discussion
    I've been doing allot of research and i think i might be able to do it myself i just don't know the right torque specs and do i have to get her tuned right after ? Injector replacement but i want to go over everything before i decide to dive in ,any tips? I only have hand tools no computer,i...
  3. 07.5-09 3rd Gen 6.7L Performance Parts Discussion
    I am swapping the G56 into my 2008 2500 6.7 that originally had the 68RFE. The truck has an Industrial crate engine with full emissions delete, and has compound turbos and looks to have had an EFI Live tuner. The truck has an OBD jack on it that leads up to a 5-way switch on the steering...
  4. 2013-2018 Non-Powertrain
    I have a 2017 Ram 3500 drw limited fully loaded with dual alternators and one alternator is putting out almost zero volts; While the other is putting out 14.6 I noticed this because my battery voltage gauge would read 13 instead of 14 so I decided to check. After getting a test with it on the...
  5. 89-93 Performance Parts Discussion
    My 1992 D350 is currently bone-stock. I'm not looking for a ton of power, but would like to wake up the ol 12 valve without destroying fuel mileage and reliability. I got my hands on a Holset HX35W turbo from a 99 Dodge Cummins. I also bought an aftermarket fuel pin and 3200rpm governor...
  6. 4th Gen Performance Parts Discussion
    2017 2500. My edge display will not get past the "initializing" screen. It has been working for years & just stopped. Any thoughts?
  7. 2010-2012 Powertrain
    Hey y’all, apologies for the rather frequent posts. I’m new to the realm up upgrading my truck and I’ve had a lot of questions recently. Starting, I have a Smeding Diesel 2g swap kit with the Cast S464/83/.90 and EFI Live tunes. I’ve been told by a few that a .90 A/R on a 6.7 Cummins will over...
  8. 3rd Gen. Powertrain
    Pretty much finished my last step of the swap today. The tuning. For me I bought a Smarty Jr. then contacted Smarty and they had a auto to manual recover written for it. I downloaded SmartyUDC, then they email me the file, I plug the Smarty into the computer via a simple printer cable that’s $6...
  9. 4th Gen Performance Parts Discussion
    Hey everyone! So I just bought a 2018 Ram 2500 Laramie 6.7L. It has a CSP5 tuning switch from Fish Tuning. Truck is physically deleted and runs great. But I noticed there doesn't seem to be a difference between the switch positions as far as performance wise. This was a 1-owner truck prior to...
  10. 2019+ General Discussion
    We just tuned our 5th Gen Ram 3500 6.7. This is the first stock truck we’ve tuned. Normally we wait until we do a full delete. I was really surprised with the power sand MPG gains. Check out our quick video on the mpg improvements.
  11. 3rd Gen. Performance Parts Discussion
    Everywhere I look on the internet some shop is getting railed by the EPA. I mean just two days ago XDP was hit with a 1.1 million dollar fine for selling devices "that, when installed, bypass, defeat, or render inoperative EPA-approved emission controls and harm air quality". I don't agree with...
  12. 3rd Gen. Performance Parts Discussion
    I got an 03 5.9 Cummins with minor upgrades. I.e, cold air Intake, intake Horn, built trans (built for about 500+hp) and a 4 inch straight pipe. I’ve been wanting to upgrade the turbo for a while now but I’ve also thought about getting it tuned and I’m stuck on what I should do. For the turbo I...
  13. 4th Gen Performance Parts Discussion
    Looking for some information on how these trucks are running tuned and what experiences y'all are having. Having a hard time finding info on trucks with Aisin transmissions and seems a lot has changed since the EPA started cracking down. I'd like to stay emissions compliant and i'm not looking...
  14. 89-93 Performance Parts Discussion
    I have a bone stock 93 first gen 5 spd. I bought the THD fuel pin and gov spring. I couldn’t get that stupid Allen screw at the back of the pump so have not been able to change that. Not sure how I am going to be able to get it without removing the whole pump and that looks like a nightmare. I...
  15. 07.5-09 3rd Gen 6.7L Performance Parts Discussion
    So I’m just getting started with some tuning I’m a noob and have always had others send me files to install. Now I want to give it a shot so I want to start off with just understanding basics of timing and duration and what fuel quantity to add?. I understand these things very quickly but I need...
  16. 98.5-02 Powertrain
    2002 24v cummins 35 inch 12wide rims and tires and spacers to adapt rims to 8x6.5 3.55 gears Fass 150 Hot rod vp44 Edge hammer bb turbo 58mm 225hp injectors Quadzilla pulse v2 4inch exhaust Built trans with stock stall Dpc triple disc firepunk valve body firepunk comp rebuild kit and gm govenor...
  17. 3rd Gen. Performance Parts Discussion
    Just about got the motor back together still waiting on some parts but the truck is an 04.5 2500 4x4 pulled the motor it’s a newer bottom end with std bore and block and head fire ringed and head rebuilt with 110 Hamilton springs and cam and tappets and push rods 12v rods new bearings all the...
  18. 2013-2018 General Discussion
    help! I have a 2015 2500 6.7. I recently bought a ez LYNK auto agent 2.0 along with a egr delete and pipes. I went to install the auto agent and threw on a quick 75hp tune just to test it out. I have code U1412 that will not go away! I tried re installing and nothing. However the first time I...
  19. 4th Gen Performance Parts Discussion
    Hello to everyone! thank you for taking the time to read, and share your opinions. I bought a used 2010 2500 ram with a 6.7 cummins about a year ago. it had 160k on the motor and is stock. about 4 months of owning the truck the engine light came on, with the dreaded P049D. I removed the entire...
  20. 4th Gen Performance Parts Discussion
    Looking for mini maxx tunes for my 2012 ram 3500. Does anyone have any files or info available. Bought the truck with the tuner and it has nothing on my 07 5.9 tuning doesnt seem right.
1-20 of 20 Results
Top