Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 76 Results
  1. 2010-2012 Powertrain
    2011 Ram 2500 4x4 SRW, 68RFE, Manual TC, RaceMe Ultra, 135,xxx miles Driving down the highway, transfer case started making noise. First grinding, then popping and grinding. Presumably the chain or sprockets(s) broke. Pulled front driveshaft and kept driving for 400 miles until I got home...
  2. 98.5-02 Performance Parts Discussion
    I'm not entirely sure if anyone else has encountered this issue but I am having a problem getting this part off of the mainshaft of my NV4500, anyone have any ideas of what this is or how I would get it off or if it even comes off?
  3. 98.5-02 Powertrain
    I have a 99 5 speed 3500 Cummins, I’ve just replaced the clutch for the truck and now it will not go into gear, the truck try’s to move forward when trying to put it in gear, I think it is the clutch pedal and slave cylinder but I’m not completely sure.
  4. 2013-2018 Powertrain
    I have a 2017 ram 3500 4x4 with the 68rfe in it. I got the low line pressure code I forgot the actual number but it started to not shift past 4th gear. I replaced the pressure sensor and boom worked perfect for 1 day. The very next day I went out to eat and on the way back it wouldn't shift past...
  5. 94-98 Powertrain
    Good Morning, I am new here so please let me know if I do anything wrong. I have a 1996 2WD Ram 2500 and the overdrive went out on me. From all of my research I have determined I have a 47RE transmission. I ordered an overdrive section online and when it was delivered I realized it did not...
  6. 89-93 Non-Powertrain
    I bought a '93 12v last year. Had some trouble shortly after with the OD and found that the TPS had been wired to potentiometer on the dash. Tweaked that back to spec and OD problems went away. This week the truck has been shifting like a dog so I check the TPS again. Read around .4, tried...
  7. Introductions
    I’m unsure if I’m placing this message in the right section as this is my very first post, but I’m in dire need of some help. I bought this truck about 6 months ago and I’d not had any problems until about a month ago. Suddenly the truck started having issues with upshifting and it was most...
  8. 94-98 Powertrain
    Ok so I am new to this thing so hang with me also this is going to be long but more info is better than less info you know. I have built the 47re in my 98 12v, shifts awesome 1-3, then it hits into 4(over drive) but I have no converter lock at any speed or rpm. Hooked a pressure gauge to my 3-4...
  9. 94-98 Powertrain
    97 2500 4x4 12v automatic. Transmission has been pulled and torn down 5 times now. Valve body and electronics replaced 3 times. Transmission shop says they have no way to test it after $1000 on valve body. I get 5 volt on many of the wires at pcm, 12 V on others. What wire has what voltage on...
  10. 2010-2012 Powertrain
    Hey all, have this thread in 3rd gen, but since g56 is also 4th thought i might get some more help here also. Been digging and reading about the heavily debated g56 preferred oil type. Also not a fan of ATF so i have come up with a few others that seem to be my best options. I will put ATF up...
  11. 07.5 - 09 3rd Gen 6.7L Powertrain
    Been digging and reading about the heavily debated g56 preferred oil type. Also not a fan of ATF so i have come up with a few others that seem to be my best options. I will put ATF up for those who think it is good option. My truck is an 09, tuned, and i believe it has a dual disk from...
  12. 94-98 Powertrain
    So imma be picking up a transmission for my truck soon and it doesn't have a transfer case with it, but I have one from my old transmission. I'm not very smart when it comes to the transmission and 2wd-4wd situation..will I be able to just bolt up my old transfer case to this other transmission...
  13. 94-98 Powertrain
    I have a 1995 12v 4x4 with the 47rh that has bit the dust. I have been looking around for transmission rebuild kits but not sure what to go with. Info on engine I estimate around 650hp and I plan to take it up to 800s or higher! It would be mainly a hot rod street truck but still would like to...
  14. 3rd Gen. Powertrain
    I have a 2004 ram 3500 5.9 auto transmission. I just replaced the pcm, the engine runs good, reverse works perfect. When I put it into drive if I have my foot on the brake it will stall. If I give it some gas it’ll almost stall but it will start moving and then I can drive but it won’t shift out...
  15. 98.5-02 Powertrain
    Hello everyone, I’ve been chasing an ongoing issue with my 2001 Dodge Ram 2500 5.9 24v Cummins. I’ve tried just about everything I can think of. Was curious to know if my transmission sounds like it’s shifting properly. I’ve adjusted APPS Voltage, Cleaned connections on negative posts. New...
  16. 3rd Gen. Powertrain
    Hi All, I have a 2003 3500 with the 5.9 and 48RE trans 4wd. I was mountain driving (climbing) and all of a sudden i was not able to get into any gear except 1st and reverse. However, if I go downhill, I can access the other gears (it will select the correct gear for my speed). It will also stay...
  17. 2010-2012 Powertrain
    Hey y’all, I’ve been reading for a while about this and that transmissions, what people recommend and what they like and don’t like. Seems like everybody likes and dislikes something else and what works for one doesn’t work for another so I figured I’d make a post for the inevitable. I...
  18. 98.5-02 Powertrain
    ***Advice and input needed: Well, I think I may have arrived and the dreaded time of my tranny needing replaced but would like confirmation, ideas, and suggestions from the group. I'm the 2nd owner with 231,000 miles on the truck. Purchased at 213,000. Unknown if truck has original tranny...
  19. 2010-2012 Powertrain
    Hello. I've recently deleted and tuned my 2013 ram 2500 6.7 with the 68rfe. It is throwing a P2701 code. Has anyone seen this and know how to fix it. The exact verbiage is below.
  20. Cummins Conversions, Shop Talk, Tools, Fabrication
    Looking for the expert opinions on what is my best option for a 4wd transmission that will have a transfer case attached. The details will take a little explanation, so here goes. I have a 2012 Ford F250 4x4 that had the 6.7l Ford diesel. I got some bad fuel and it fragged my entire fuel...
1-20 of 76 Results
Top