Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. 98.5-02 Performance Parts Discussion
    Hello all! I am installing a Thuren trac bar on my 2002. following the instructions, I used a grinder to allow for fitment on multiple places. However, the bottom bolt that holds the mounting bracket to the frame is off over 1/2 inch. Instructions state if the hole is off 1/8 inch or less to...
  2. 2010-2012 Non-Powertrain
    I bought a eBay adjustable track bar has anyone ever had to change the bushings I'm looking for hopefully a part number
  3. 2019+ Non-Powertrain
    I have a 21 3500 with a 4" bds radius arm kit. Kit was installed at 1500 miles, first track bar came loose and stripped some threads after about 1000 miles. Ok, stuff happens so bds sent a new one to replace it. It was installed and red loctite used to keep it clamped down. Now with 35,000 miles...
  4. 07.5 - 09 6.7L Non-Powertrain
    I’m thinking about putting some traction bars on my 09 2wd. I’ve heard caltracs are the best bang for my buck. I daily drive this truck and don’t tow very often with it. How are the caltracs for daily driving city/highway? I do have a few mods done to it so it does have some power.
  5. 2010-2012 General Discussion
    I am currently replacing some front end parts and have made my way to the track bar to replace bushings (looks to be an Adjustable BD) however the bolt is stuck in the bushing sleeve and am ready to cut it out to save some pounding, the bolt is slotted and has a offset welded shim on the head...
  6. Track Bar

    Moog track bar beside stock
    Image uploading. Refresh page to view
1-7 of 7 Results