Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 2nd Gen Tire and Wheel
    I know this has been asked a million times, but I'm about to put new alterrains on the truck it's a 95 3500 4wd flatbed.. I don't haul to much mostly aback in forth to work truck it all. I have 245s that came on it on stock 16s I would like to go bigger like 265 or 285 but really not crazy about...
  2. 2019+ Tire and wheel
    I ordered a 2021 Ram 3500 Mega Cab, Night Edition, HO motor, 4.10 gears, 4x4. -keeping the 17" night edition rims -thinking 295's or even 35's; with minimal rear tire sticking out past the fender (some is fine) -don't want rubbing or trimming Keeping in mind that Ride Quality is my biggest...
  3. AlfaOBD
    This thread is for adjusting tires sizes using Alfa OBD. the procedures are shown in the procedure thread. This thread is to share known MM conversions that correctly adjust the speedometer to accurate readings. Please only share verified numbers. Also verify with a GPS device or your...
  4. AlfaOBD
    This thread is explicitly for Alfa OBD procedures, it is not for discussion or commentary. Please title your post, or section of your post with the procedure end result along with any other necessary info, followed by the entire procedure. If a 4 digit pin (sourced at the dealer parts...
  5. Tire and Wheel 3rd Gen
    Hey fellas, Just got some new(er) tires put on my truck and figured I would show pics for future reference as there doesn’t seem to be much. I went with the Toyo a/t 2’s in 285/70/17. The first two pics are the stock size tires (265/70/17), and the last three are with the Toyo’s. Will report...
1-5 of 5 Results
Top