Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. 2003 & Early 2004 Only Discussion
    I have a 2003 dodge ram 2500 cummins I have no AC but that's because the last owner ripped all the AC piping, condenser, etc out so that's fine but I have no heat and only air blows out of my defrost and floor and there's barely any air blowing out. So I tore a bit of the dash apart and checked...
  2. 3rd Gen. Non-Powertrain
    I just bought a new to me 2006 G56 5.9 third gen that has me stumped, and I'm hoping someone on here has an answer. On the initial power up of the cluster (aka when opening the door for the first time or keying on after the truck has been sitting) there is a strange electric buzz or zap noise...
  3. 07.5-09 3rd Gen 6.7L Performance Parts Discussion
    Hey guys, I have an extensive list of stuff I have to do to my truck, some of it preventative (steering) and some of it necessary (exhaust leak, plugged egr). My question is: should I delete my truck now when my tailpipe is already rusted out, my egr is plugged, and I have an exhaust leak...
  4. 3rd Gen. Performance Parts Discussion
    Looking for some help on this one. I have a 06 Cummins and planned to do a simple turbo back 4 inch straight pipe on it. I bought a diamond eye kit without knowing it did not bolt up to my turbo. I have a bd power super B turbo that needs a different down pipe for the kit to work. I found the...
  5. 3rd Gen. Powertrain
    I have an 04 3500 4x4 auto , recently bought the truck in January and have been doing little things here and there to it. Recently got the HP tuner by firepunk diesel, truck shifts great when you give it the beans until 4th. From 3rd it will short shift 4th and go right into OD. Need some...
  6. 3rd Gen. Non-Powertrain
    I recently purchased a third gen, and the wife wanted to add step bars. I bought a used set of Westin Platinum nerf bars that primarily mount to the body mount bolts, with secondary supports to pre-drilled holes in the bottom of the rocker panel. My rocker panels are rusted. Has anyone tried...
  7. 3rd Gen. Non-Powertrain
    Good evening all - (This is a long one) I am a former 12V guy who is looking into getting back in the game. I want to get a CTD and put a slide in camper in it and pull one of my Jeeps around. I've been shying away from the electronics because I don't like the idea of people messing with things...
1-7 of 7 Results
Top