Dodge Cummins Diesel Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

starter

  1. 3rd Gen. Non-Powertrain
    I was having a reoccurring issue where I'd get a 'click' once a second when I attempted to turn the truck over... Sometimes the truck would turn over immediately, sometimes it could be a bit... Sometimes had to wait 10-15 minutes... but it would always start and I would always hear the...
  2. 98.5-02 Powertrain
    So one day my starter seemed like it was taking a dive on me, I had to push start it to get back home from work because the starter wouldn't engage. There's no check engine light, I've rebuilt the solenoid, replaced the relay, checked all fuses and wiring, but it just won't turn over. The only...
  3. 98.5-02 Powertrain
    So a couple weeks ago when I went out and started the truck it cranked over pretty slow but started. The day before it fired up quick with no issue. Over the past couple weeks the problem has gotten gradually worse and the truck has barely started the past couple days. So today I pulled the...
  4. 3rd Gen. Non-Powertrain
    Hi Cummins People, I had issues with my electrics this Spring, which I deduced was due to corrosion in my fuse-box / TIPM via others' reports in various forums. I removed my fuse-box and sent it to Circuit Board Medics in the States for repair. Upon installation, all seemed good. But the other...
  5. 89-93 Non-Powertrain
    Working on a 93' D250, Automatic. The Original "broom" and a number of the fuseable links went full send/meltdown with a side of smoke. Removed links and burned wiring and swapped in a Safety Hub 150... Not sure what caused multiple fuesable links to go (seemingly at once, or which one went...
Top