Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 98.5-02 24V P-Pump Conversion
    Searched and searched to no luck. Im trying to figure out what ppump setup i can put on my 24v that can support 500-700 horse and be used as a street/strip/tow/daily. Can a 165 pump support it and with what mods to the pump? I know a 215 pump would support it with mods, but need those specs...
  2. 94-98 Powertrain
    Hello, first thank you for taking the time to help me out. I’m going to try to remember to list everything I’ve checked/done so far. im in Kansas, and the weather dropped down to -8 so far. Normally in the summer, my truck fires up immediately, if I tap the pedal. If I don’t it takes an extra...
  3. 94-98 Powertrain
    I have been battling this problem for awhile now.. I guess my question is, If I have the motor at tdc should I be able to see the timing tooth in the ppump if set at 18 degrees advanced? Cause I’m not seeing it in the hole at tdc
  4. 94-98 Powertrain
    Hello, I just purchased a 2014 12v with a vp44 pump. The engine only had 80k miles but I want to change it over to a p pump. Any suggestions on converting this 12v back to its original glory days? Will any p pump work? I’m also installing this engine into a 99 f350 with a 6 speed. Any advice...
  5. 98.5-02 24V P-Pump Conversion
    I'm looking to build my p-pump 24v to 1000hp currently it has -cometic mls headgasket, nitrided valves, properly seated for the cam lift. -arp 425 headstuds, haisely gorilla girdle with xl mainstuds, arp rod bolts, factory rods, coated mahle factory replacement 0.20 over pistons coated on the...
  6. 98.5-02 Powertrain
    So I just bought a 2001 Dodge Ram HO 2500 4x4 SLT 4x4 183,000 miles. Motor work consist of Hamilton race cam188/220,5x18 injectors, 215Ppump, Full Cuts, Fass 200, silver bullet 66mm, mishimoto intercooler, AFC live trans is a dual disc Valair NV5600 that’s all I know of. So little history to...
1-6 of 6 Results