Search Results for ‘power steering’

2006 3500 I was tightening the pitman shaft nut after putting on the updated pitman arm for the "Y to T" upgrade and also installing a brand new Borgeson upgraded power steering box. According to my 2006 factory manual, torque on the pitman arm nut is 225 ft-lbs. According to Haynes, and in a...

Hey everyone, I’ve had an issue after starting to work on my truck after the rollover. The power steering will only move a certain amount in one direction. About half of a steering wheel turn to the left, and 2 steering wheel turns to the right. I would like to get it figured out everything...

I put a 89 12 valve in my 1998 k1500 I put the Chevy power steering reservoir on the dodge pump, I filled it up to the fill line, jacked up the truck and turned the steering wheel left lock to right lock about 20 times until bubbles stopped coming out but still the power steering does not work...

I know this has been discussed in various ways. I am going to be on my 3rd power steering pump in 130k mi. Looking for something that will actually last. 2010, 6.7 deleted, 3500 srw crew cab. Thanks for any input!

Anyone got any info about a good power steering pump replacement? Us 2wd ppl are heavily limited on whats out there. I’ve salvaged the OE pump previously (check my old thread) but its just heavily damaged by previous negligent owners and now it whines and won’t turn in parking lot situations...

I just picked up this old 01 3500. No power steering to speak of. Kinda intermittent , fluid coming out of reservoir when turning. Has brakes but the peddle fights back and noisy. abs light is on. truck has been sitting for 5+ years What should be my plan of attack?

Hi everyone, i was leaving Walmart today and started my truck(1995 12 valve 47rh 4wd), went to pull out of the spot and had no power steering (I own a ford so I know the feeling) so i threw it in park and went to look for leaks and check the fluid ect but nothing looked wrong. I then pumped the...

Hello everyone, I am having an issue i just can't seem to figure out. i bought my 04 5.9L in October of 2021. not even an hour after driving off the lot my power steering went out. i went to the dealership and they gave me a refurbished power steering pump. after installing the new part it...

I am swapping a 12 Valve out of a 1995 2500 into an 1971 Dodge Pickup truck Chassis school bus. To get power assist steering in the bus I was going to go the Electric route as it seems like it will be the easiest and cheapest method. I was wondering if there was a way to delete the power...

I live in North Dakota where it gets pretty damn cold. -20 the day my issue occurred. Started my truck up, ran fine. Took it for a drive and out of the blue it smelled like smoke. Notices my heat was out. Next day I went to test drive and trouble shoot and I had no power steering and brakes...

let me say thanks in advance for any input on this issue. I have a 2015 Ram 3500 about 8 months ago I had one of my hoses replaced i believe the one coming off of the hydro boost to the p/s pump. The liner had come detached inside the hose and was causing a similar noise and vibration I am...

I know this is a Cummins forum but i have received 0 info from the gasser forums, this topic has been discussed before on here and since its 2021 i like to think my truck would choose to identify as a Cummins.... 🤣 I have an 06 Ram 2500 with the Hemi and g56 transmission. My power steering pump...

Recently my PS steering pump went on the 2010 2500, I got a replacement and did everything - the job went really smoothly up until the bleeding process... I tried what feels like every imaginable method to try and bleed the air completely out. Although I got very close - there is still some air...

Well, I'm at the point with my 97 where I need to replace my power steering pump. While I'm at it, I was going to pull it all out and rebuild the vacuum pump as well. With the research I've done, peoe are saying the drive dogs in the pump usually break off around 150k miles and leave you with no...

had a set of cracked ps high pressure lines. Replaced both sets(from ps pump to hydroboost, hydroboost to gearbox) Now my ps pump is leaking from the cap when steering. Any suggestions would help.

I have a 97 12 valve, and my steering is humming and hoses are vibrating pretty good at idle when I try to turn my wheels. And my brakes are humming and vibrating when pushed in pretty far. And brakes haven’t really been right since it’s gotten worse. Wondering if this is a power steering pump...

So I have a 97 12 valve, and my power steering always wined a bit and would slowly leak. But out of no where it’s gotten really really bad and my brakes are making the wining noise, also when I try to turn my wheels at idle (which it’s very hard to get them to turn at all) with the hood up the...

I’ve changed everything that has to do with the power steering, Vac Pump, PS pump, Hydroboost, lines, steering box. While bleeding it I’m able to build up a pretty stiff pedal, but as soon as I start it up I can press it as far as it will go easily. I cracked the return line to the hydroboost...

Hollow this is my first post. I have a 2000 dodge cummins and I have been having steering problems for a while. Had death wobble, fixed that with a new steering box, now power steering pump leaking I replaced the seals. Now my power sterring wasnt good so I replaced the pump with one from napa...