Search Results for ‘nv5600 6-speed’

Hey guys I’m new to the forum, thanks in advance for any info given. My 2014 ram ate its 7th 68RFE not long ago. It was a stage 3 ATS. Needless to say im fed up with 68RFE’s. I’ve been looking into a G56 swap for a while but haven’t been able to find everything for a good price. I found a guy...

Hey Guys I’m new to the thread and new to the Cummins community I’m just wondering if anyone can help me here. I bought a truck with no transmission and trying to start it to ensure everything runs fine before dumping a bunch of money in it. I have the adapter plate on and flywheel and have the...

I’m debating if I should put an Edge tuner in my 02 24v with a NV5600. I already have 95hp injectors and a larger turbo (not sure the size). I’m wondering if since it’s a manual if I will notice that much of a difference, or if it’s worth it?

OK so when pulling my trans a vacuum line came off it's red and it's in the same room that the reverse light is and the vacuum deal for The transfer case it's further upstream closer to the motor it's a red vacuum line with a boot on the end of it and I don't sure where it goes and I can't seem...

Hey guys, I've got a nv5600 rebuild that im working on right now that's replacing my 48re. I was a mechanic working on diesel trucks for a while so I'm no stranger to these kind of repairs but this nv5600 is kicking my ass. I bought this transmission from a guy who had it apart for a 6th gear...

Saw this tab and thought that it could always be a good idea to introduce myself and maybe show off my pickup a little, after all a little friendliness goes a long ways most of the time and I never mind getting to hear others ideas about my pickup and stuff that could be done to make her better...

I'm sure this horse has been beat to death just wanted to see what actual people that have done this swap think and how it handles power and what it's reliability like my rigs a work truck gunna get 100 sticks and prolly a s300 eventually or do turbo lab Americas 62 hybrid not trying for power...

Hey guys I have the ‘03 2500 with the six speed and I got the south bend clutch put in by a very reputable shop (or so I thought) and less than five thousand miles on the clutch I went out and started it one morning for work and it sounded like a rod was going to go through the block. I sat...

I bought a second gen dodge and boy has it been a wild ride! Ive stuck more money i to this thing in the last month then ive ever stuck into my former 3rd gen. Its a 02 2wd 1ton with the nv5600 256kon odo, but the trans has probably less then 60k on a rebuilt wheller trans. I haul rvs with it as...

Looking for help in a diagnoses before I pull the transmission, the other day I was driving my 04 3500 (11/03 manufacture) with a NV5600 in it and I just got this truck (sigh). I have had no transmission problems or any problems of any kind until now. I was starting to climb a small hill and my...

I'm looking into manual swap options once my 68RFE bites the dust. I'm leaning towards the NV5600 but need more clarification on a few items to be able to make a decision on the direction I want to go. Will the G56 Adapter Plate work for the NV5600? Will the 68RFE Tcase physically bolt to the...

I recently changed my starter and since then my truck will randomly cut out when I try to go above 1500 RPM. If I shift before 1500 RPM then it doesn't happen, but I live in SoCal so I can't really drive at highway speeds like this. I don't know of the lift pump is going out or if it's a bigger...

So one day my starter seemed like it was taking a dive on me, I had to push start it to get back home from work because the starter wouldn't engage. There's no check engine light, I've rebuilt the solenoid, replaced the relay, checked all fuses and wiring, but it just won't turn over. The only...

I drive an 04.5 3500 with a nv5600, when i downshift i try to rev match or double clutch, but does blipping the throttle from idle rpm to say around 2000 rpm hurt the engine at all? Ive been told recently that free revving or revving not under load hurts an engine.

I just put my new motor In my 2001 dodge 2500 24v 6sp, and I’m trying to figure out where the grounds are to the motor and how to get power to everything. If anyone to could shoot some pointers or help me out on how to do it, it would be much appreciated!

Long shot but im looking to swap my 2006 48re to a manual. Either g56 or nv5600. So if your interested in trading setups let me know. Im located in hendersonville north Carolina 28792. Trans has upgraded transducer and gov. And I have a bd diesel pressure enhancer. Truck is daily driven. Can...

What everyone running on their 6 speed trucks? Looking for a good performance boost over stock. Already have FASS and dual disk clutch. Also what’s the best tuning to run? I am currently using a Smarty, thanks