Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. 94-98 Performance Parts Discussion
    So when I put my 4k governor springs kit in i forgot to take out the 2 piece of the bottom peda stool so now when I try in rotate the motor the pump is not spinning with the motor. So I can't get the springs back out. And sadly l remembered that after I was halfway to the other set of springs...
  2. 98.5-02 Non-Powertrain
    I have a 01 Cummins having bad fuel issues it had deadpedal and then I popped the fuel filter out had fuel almost black and then had sand and dirt in the bowl cleaned it out put new fuel in and still no start it will Crank but no start stumped on what to do next there’s fuel seeping through some...
  3. 07.5 - 09 6.7L Powertrain
    Alright guys I need help!!! Engine/ -Wagler street fighter Rods -Industrial injection 12mm gorilla girdle -Arp main studs -Machined block -Machined head -Hardened valve seats -ARP 625+ -Bolt in freeze plugs -110lb Manton tower springs -Tool steel valve spring keys -Hamilton extreme duty...
  4. 94-98 Non-Powertrain
    im trying to figure out what size the Banjo fitting for overflow valve on injection pump return is, trying to order a new one to replace mine
  5. 2003 & Early 2004 Only Discussion
    Replaced front right caliper, but left the old one off for a few days. Locked up few days prior. but then released enough for me to make It home. Went to bleed the brake and can not get brake fluid out of it. Even took the line off the caliper and just let it hang and still no fluid. even left...
  6. 4BT Conversion Builds and Shop Talk
    So here’s just a question, I was wondering if I do the 4BT with the SM 465 well I still need to up the shaft on the transmission or is that motor low enough torque and low enough horsepower that it won’t tear up the transmission. From what I understand you guys are going off of like a 12 valve...
  7. 2013-2018 Non-Powertrain
    Need help guys! Got a 2016 6.7l deleted tuned by double R diesel. Got fuel and the truck started running rough and after a few miles threw a cylinder 6 misfire code. I ran a can of sea foam and it cleared up, filled up at a truck stop and it ran perfect for the whole tank then filled it up at...
  8. 4th Gen Performance Parts Discussion
    I have a 68rfe it was built before with BD stage 3 performance kit, BD triple disc street/tow, BD billet flex plate, billet input shaft, 4+ quarts trans. Im going to get the big stack shaft/drum kit. I just want to figure out what I need without get a kit of stuff I already have and don't need...
  9. 2010-2012 Non-Powertrain
    My 2012 ram 2500 has the EGR and DPF deleted with EFI tunes, straight piped, S&B intake, cts3 monitor. A few other upgrades that I don’t think pertain to the issue. Driving home yesterday and everything was going normal then accelerated to merge onto the freeway heard a loud pop. Immediately...
  10. 2010-2012 Powertrain
    New to me owner of a 2011 2500, brought it into a local Diesel shop and Had them replace transmission fluid and gaskets. Vehicle had not leaked transmission fluid (or any fluids for that matter). Get it home and to my surprise find that it’s leaking pink transmission oil. I take a look under...
  11. AlfaOBD
    I'm new to the forum, I tried looking for the correct place to ask this question and I hope this is the spot, if not delete if not allowed. So I purchased a 2016 Ram 2500 6.7, 68rfe, Megacab, 4x4, laramie. Upon purchase I knew it needed a turbo actuator replaced, so I bought alphaobd & an mx+...
  12. 94-98 Powertrain
    Hey guys so im potentially getting a manual Cummins soon. Its a 4x4 1994 dodge ram 2500 5.9 12v and the speedo doesn't work. So im just wondering is there a difference in location of the speed sensor on a manual compared to an auto? If so where is it? Cuz id like to order the part the same day I...
  13. 03-07 Non-Powertrain
    Okay guys so I bought a 2006 Dodge ram 2500 from auction recently when it got delivered to my house both batteries were dead we had to use to jump box is to start it to pull in my driveway. First thing I did in the morning was buy two brand new batteries to start the truck. It fired right up so...
  14. 03-07 Powertrain
    2006 2500 5.9L6 truck was shifting fine with 0 issues. I did a body swap and now I have no codes, but the trans shifts late and harsh and seems to kick down to first right after going into 2nd (only does the kickdown at nearly wot). If I lift a bit it shifts as it should. I have replaced the...
  15. Delaware
    Christianrudelis1234@gmail.com If anyone you can point or leave me in a Direction 2 finding a Cummings four-wheel drive I would greatly appreciate it I've been searching for a while have a budget of 10,000 cash which I will be willing to used to purchase the truck
  16. 94-98 Powertrain
    I have been battling this problem for awhile now.. I guess my question is, If I have the motor at tdc should I be able to see the timing tooth in the ppump if set at 18 degrees advanced? Cause I’m not seeing it in the hole at tdc
  17. 98.5-02 Powertrain
    Alright guys got a quick question been slowly putting my motor together and was swapping my oil drain for the new turbo. When I pulled the old factory one out I noticed that the second oring was not there. Looked down the hole and Found it in the pan. Tried getting it out for two hours. Should...
  18. 98.5-02 Powertrain
    i’ve got a 2001 24v and when i bought it, it was having a very bad dead pedal issue, it has the 5spd nv4500 in it, i was told to replace the TPS or APPS, i replaced it, didn’t have the problem for a week now it’s worse than it was before, the truck has CS2 edge tuner in it but i run it on stock...
  19. 03-07 Powertrain
    I have an 04 3500 5.9ho, and I keep getting an intermittent p0336 code, it'll go away some times and come back. I've replaced the sensor 3 times now, and it still has a problem, my only thoughts are it's the harness, tuner or (hopefully not)ecm, any insight? The symptoms are it just misses every...
  20. 94-98 Non-Powertrain
    Around 6 months ago, my brother bought a 2008 ford f350 with a 97 12 valve cummins, it ran great, everything was fine. But around a month ago it began having some issues, the battery dies within 1 hour of shutting the car off. Also when we are driving around the car stalls when we come to a...
1-20 of 23 Results
Top