Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 2013-2018 Non-Powertrain
    https://youtube.com/shorts/11xOTdgogW4?feature=share Have been dealing with an issue where my RPMs bounce up and down when doing less than 10mph. Doesn’t do it in park - only in Drive Neutral and Reverse. If I open the truck door the loping stops momentarily until I start moving again. Seems...
  2. 2010-2012 Powertrain
    I have a 2010 2500 6.7 had over the last month been dealing with a surge issue. It happens in park and at idle, or in drive at a stop, it will surge maybe 100 rpms. Also, when cruising at 65-70 I feel and notice a slight consistent hesitation. If I accelerate it will. I have, in an effort to...
  3. 98.5-02 Powertrain
    Hey all I'm brand new to the cummins forum and this is my first post and I am looking for some help. I drive a 2001 5spd 24v with compounds, 7x12 ducky injectors, bd diesel remanufactured vp, edge juice with attitude, head work and built valve train pretty straightforward. Recently the truck...
  4. 2003 & Early 2004 Only Discussion
    Hi all, I would really appreciate some help with this issue I'm having. I am working on a 2003 Dodge 2500 with a 5.9 Cummins. 229,000 miles. Initial complaint was a really rough idle and lots of white smoke. I did a cutout test. All 6 cylinders fluctuated at idle when I cut them out...
  5. 2010-2012 General Discussion
    I have a 2011 6.7 with 186,000 miles, that has fully deleted egr, 4” turbo back (no cat, muffler, or dpf) and throttle valve deleted. I also have an edge cs2 evolution on it. Other than that truck is stock. While at idle the truck will run between 4.2-5.0 rail pressure then spike up to 16-17kpsi...
1-5 of 5 Results
Top