Dodge Cummins Diesel Forum banner

electrical

  1. 2013-2018 Non-Powertrain
    Ok so I have been reading so many things on this forum my eyes are starting to go crossed. I also seen that when people have a issue they are quick to tell the problem, but nothing on truck history, years, models, ect. So the run the run down is as follows. Its a 2015 Dodge Ram 3500 2 Wheel...
  2. 3rd Gen. Powertrain
    Hey All, I am reaching out to the gurus to see if there are any recommendations or help regarding a headache of an issue. I was popping a P2509 code, read on this forum that bad batteries can cause that issue. Found one battery toast and another at 12.3V. So not looking good. Replaced both...
  3. 3rd Gen. Powertrain
    This is gonna be a long post guys so bear with me. This is my first post but I have read more forums at this point than I can count. This truck is becoming a bigger headache and PITA by the day so hopefully somebody has an idea for me of what to do. I have an 03 cummins 2500. This is my first...
  4. 3rd Gen. Non-Powertrain
    Hey yall, So my 03 24v died on me randomly while driving and wouldn't start again(no crank, nothing electrical worked, red light solid on dash) until I put jumpers on it for literally less than 10 seconds And it fired right up. Drove like a dream for the rest of the day. This morning I had the...
  5. 98.5-02 Non-Powertrain
    So my fuse for the running lights keeps blowing. I can’t seem to find a short. My turn signals work fine. Dash illumination lights are out but the dash works. Anyone have any input? Would be greatly appreciated. Thanks
  6. 3rd Gen. Powertrain
    New member here and this is my first post, I've got an 05 cummins g56 I bought a couple months ago and have had an issue with it over charging, right now it's reading just under 18 volts, I've replaced both batteries, alternator, and cleaned up terminals and grounds and it's still reading high...
  7. 94-98 Non-Powertrain
    i have a 2008 ford f350 with a 12 valve cummins. when i start the engine the tachometer either doesn't move at all or is jumping all over the place, but if i start the engine and simultaneously press on the gas pedal then the tachometer works fine. How do i fix this? I already replaced the whole...
  8. 3rd Gen. Non-Powertrain
    I have a 2004 cummins, recently I replaced the headlights to aftermarket LED. the installation went well no issues everything worked. I then added a light bar, during the adventure through the firewall for the switch I used a knife to poke a hole in one of the rubber seals. the light bar worked...
Top