Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 4th Gen Performance Parts Discussion
    Truck info: -2015 Ram 3500 6.7 Cummins -Truck is deleted -Tuner using is EFILive AutoCal V3 I am doing a second gen swap with my 2015 Ram, I previously did a delete on the truck about a year ago. The tune flashed fine then and the truck was running fine. I got the new tune file for the second...
  2. 3rd Gen. Powertrain
    I have a 2004.5 2500 6 speed cab is rusting out. I just purchased an 03 dodge 3500 6 speed. The motor is junk so I planned on bringing my motor from the 04.5 both trucks are complete and run and drive. Do I need to put the 03 harness on the newer motor or can I swap my ecu and harness to the 03?
  3. 3rd Gen. Non-Powertrain
    Hey all, another FCM issue (maybe). I’ve done all the research and reading I can and have done a lot of in depth testing already but I’m at a loss. ISSUE: My gauge cluster works intermittently. The tach and speedo work for about 5 seconds and then off for about 5 seconds. The other gauges will...
  4. 98.5-02 Powertrain
    2000.5 Dodge cummins 2500 130,000 miles fass 165gph quadzilla So I have replaced the cam pos sensor 3 times and it has failed again. What could be causing the cam pos sensor to continually fail. ECU? Wiring?
  5. 3rd Gen. Non-Powertrain
    Hope someone has some insight... loosing my mind lol. Let me start with my truck and how this all started I have an 03 3500 srw 246,000 miles Things I've done over the last 8 years Fass 150 Platinum (single filter)(6yrs ago) Aftermarket wastegate (6yrs ago) Smarty SP06 POD (7yrs ago) Fully...
1-5 of 5 Results
Top