Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. 2013-2018 Powertrain
    Does anyone knows how the valve train on the 2013-2018 6.7 cummins engines get their lubrication?
  2. 98.5-02 Powertrain
    FIXED!!!! (Check your engine control fuses! Hard to tell if they are blown, but could save you spending money on things that aren’t broken!) So I recently installed a Fass lift pump on my truck and it had the in tank lift pump so anyways before I did that I of course disconnected all of the...
  3. 2010-2012 Powertrain
    What’s the line pressure supposed to be on a 2011 ram 68RFE in neutral Drive and reverse
  4. 2003 & Early 2004 Only Discussion
    So got this 03 5.9 cr has bulldog gt tuner single disc tc and billet input shaft drove for 2 and half weeks daily no issues or any problems at all but it was running on 1 battery the other was disconnected and had lots and lots of corrosion got it all cleaned off put a new battery in drive...
  5. 03-07 Powertrain
    Hello everyone hoping I can get some help on here I have a 2007 ram 3500 with the 5.9 and 48re 3k miles ago we replaced the transmission with a new one it only made it 3k miles before we started having issues out of it , the truck will not shift below 3rd gear when coming to a stop or trying to...
  6. New Member Introductions
    Bought my first 2nd gen dodge ram turbo diesel yesterday and it feels so good... Finally doesn't do it justice, went on vacation back to my home town in Maryland to get it, all the way from south Florida... Duad can, 4wd,auto trans,bone stock except muffler delete,my son's highschool friends...
  7. 98.5-02 Powertrain
    Alright i have a 86 1st gen that i swapped a 24v cummins with a nv5600 into from a donor truck and after the swap iv noticed that when i release the clutch in 1st or 2nd gear the motor revs up to around 1500 rpms(estimate cause i dont have a tac) and feels like ill end up burning clutch and have...
  8. 03-07 Performance Parts Discussion
    I was wondering what the udc can do for the smarty s06. I have been reading up on it but I can’t find the answer I’m looking for. What can I adjust with it and can i adjust the fueling/ low boost fueling? Is their any major differences between udc pro and just normal udc? Thanks!
  9. 03-07 Powertrain
    Hey, I have a 03 Cummins that I am rebuilding the top end. I have a new head on the truck and the old bolts for the intake plenum had RTV on them. Do the bolts need thread sealant or O-rings for them? Thanks
  10. 03-07 Powertrain
    Spun a bearing looking to rebuild, crank may be trashed beyond reasonable repair. Been searching and found a shaft with no gears says it will work 89-07, given the correct gear installed for generation, straight or helical, with that being said can a take a 99-02 24vcrank and use it just replace...
  11. 2003 & Early 2004 Only Discussion
    I've seen snorkels on quite a few rams but none of them were 03's or Cummins. So my questions are. 1) Is there a snorkel kit for the 03? 2) If so. Who sells it? 3) Lastly. What is the harm in snorkeling a 5.9 Cummins?
  12. 98.5-02 Powertrain
    I have a Firepunk tow master and i just rebuilt the trans with there rebuild kit it has just over 1k miles and it’s time to drop the pan and service the bands filter and fluid I figured I should up the line pressure as when the trans is hot it has a minor amount of tc shudder but I’m unsure of...
  13. 98.5-02 Performance Parts Discussion
    Hey y’all, I’m looking for a different turbo setup for my 24v I am having a super hard time choosing what route I want to go I do know I want to stick with a single turbo. My current list of upgrades are as follows: Colt cam big stick 188/220 275 injectors Push rods ARP head studs Fire ringed...
  14. 98.5-02 Non-Powertrain
    I’m replacing the dash on my 2001 dodge 2500 and I found out that the actual frame of the dash was broken so I got a new one from a 2000 1500 parts truck. Now I have my original wiring loom from the dash and found some Burt wires now I’m wondering if I can just use the wiring loom out of the...
  15. 98.5-02 Powertrain
    I have a 2000 Dodge Ram 2500 24v and it came with the P0122 code, replaced it, erased code and recalibrated with Timbo APPS and after a Master Drive Cycle the code came right back. I was previously driving a 7.3 Powerstroke and I'm starting to regret getting rid of it. Any ideas? I have to smog...
  16. 98.5-02 Non-Powertrain
    I’ve got both full trucks. Restoring a 99 2500 regular cab 24v 4x4 auto, I’ve got a 97 1500 regular cab gas 2wd non-ac. Cummins is rotten and thinking it might be easiest to do the cab swap. What kind of headaches come with swapping the cab?
  17. 98.5-02 Performance Parts Discussion
    I have a 2002 vp44 24v truck started at first to loose power after going over 75 starting getting to the point where you could not drive over 20 though I had a bad injector replaced the injectors with a set of 100hp’s now it hard starts and will barely stay running and loose my gas pedal so to...
  18. 2013-2018 General Discussion
    I have 2013 Cummins deleted with anarchy efi still has all egr just unplugged I’m going to be deleting it all soon truck has 91k any one have an idea I can’t find anything about what it is runs great idle smooth
  19. 03-07 Powertrain
    Alright my fellow Cummins brothers(and sistas).... I need help in a bad way. I bought my very first diesel about 1 1/2 years ago (2004 ram 2500 4x4) truck was a steal. Had 160k miles on it 6in lift running 35’s. I have loved the truck until a few months ago. I’m having a problem with it shifting...
1-20 of 24 Results
Top