Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 32 Results
  1. 98.5-02 General Discussion
    Hello, here is yet another front end overhaul questions thread. I am looking at picking up a DORMAN TA81259PR 3rd gen steering system to throw on my second gen because I cant afford that synergy stuff. Along side that I am picking up a decent reviewed set of ball joints and a track bar...
  2. 98.5-02 Non-Powertrain
    Hello, I seem to be having an issue when I am trying to hook up a snap on computer to read info from my OBD II port on my truck. The computer connects but wont stay connected. When i was talking to some o the guy at the shop I work on my truck at they said it could be from a bad ground in the...
  3. 98.5-02 Non-Powertrain
    Good morning to all who read. I got my truck running this morning and went to the gas station and then I noticed a big puddle of fuel under my truck, I popped the hood to see a decent sized leak coming from the top of the fuel filter housing. It is about -20F outside right now and I did not have...
  4. IMG_0872.jpeg

    2006 Ram 2500 5.9 6 speed nv4500 33x12.5x22 Motiv Moto rims . Afe cold air intake.
  5. 89-93 Powertrain
    Is this the proper pinion seal for a 1988 dodge w350 Dana 70 rear end?
  6. 03 - 07 General Discussion
    hey guys, idk if I got a problem or not but I have a 03 5.9 Cummins and the oil pressure gauge tends to set up high, in between the “normal” bracket but not the max. As the truck warms up or the coolant gauge goes up, the oil pressure goes down. I don’t know if it’s normal, if it’s a big...
  7. 94-98 Non-Powertrain
    Hey all, I am new here and looking for someone to help explain the fuel shut off solenoid. The previous owner of my 96 ram , 12 valve have an aftermarket airdog fuel filter and pump installed and the fuel line goes directly to the injection pump, not the stock filter system. With that being...
  8. Commercial On Road Cummins Engine Discussion
    Been working on a mt45 Stepvan that originally came with a acceleration problem so I replaced the vp44 and the liftgate pump afterwards I only had a dead pedal and dies when put into drive 2 other codes that come up on and off sometimes is p0434 and the p0278 which is possible low power and...
  9. 03-07 Performance Parts Discussion
    Ive looked all over the internet and i cant find a 4 inch turbo back i want a diamond eye exhaust for my 06 but i cannot find any. if anyone knows where to get one lmk thanks!
  10. 94-98 Powertrain
    i have a 1995 ram 2500, i’m having an issue with the turbo not kicking in. does anyone have any answers to what the issue could be?
  11. 03-07 Performance Parts Discussion
    I would like to buy a 2nd gen manifold and do a s363 turbo for some more power but in the youtube videos ive watched it seems that the 2g manifold makes a louder raspy tone to the truck. i was wondering if anyone has had a 4 or 5 in straight pipe on this manifold and does it make it louder? dont...
  12. 98.5-02 General Discussion
    I just finished this swap from a 47re to nv4500 the truck drove perfect for about 20 miles. Volt gauge was at 0 and check gauge light was on thought maybe just a loose connection wiggle 2 wire plug on back of alternator and the gauge would show good then alternator just stopped all together...
  13. 12v Conversion Builds and Shop Talk
    So I have the 12valve and a nv4500 bellhousing out of my 95. But no trannny I have a 2wd getrag from a 91 12valve. What do I need to mate them up together. The set up is going into 1950 gmc 3ton
  14. 03-07 Performance Parts Discussion
    Hey y’all. I have a 2003 dodge 2500 Cummins. I want to get a tuner that will show higher performance ability but also safe on the transmission. What’s your recommendations?
  15. 03 - 07 General Discussion
    Hey guys on the Cummins forum ! I’m new to this but I have a 2006 Dodge ram 2500 5.9 4x4 SLT . I’m local to Florida and impacted by the recent hurricane Ian . I’ve been using my truck to help with the clean up of our community until my truck started acting up. it currently won’t go over 20MPH...
  16. 03-07 Powertrain
    Have a 03 disel and my cruse control worked most of the time when I bought it tough sometimes didn't want to engage, now it's completely out, however at random times the cruse light comes in the dash board but pressing the buttons does nothing, have replaced the clock spring since my air bags...
  17. 98.5-02 Powertrain
    I just got a D&J stage 1 head and after doing that the truck is dumping dark dark black smoke in lower rpm’s. Not sure why? And what I can do to fix it. There is no boost leak. I’ll had the total build below 5.9 24v Engine Build . .020 thousand over bore . D&J precious Stage 1 head (All-new...
  18. 98.5-02 Non-Powertrain
    2001 dodge ram 2500 4x4 I recently installed a new fmvb in my 47 re and a new plug that only has 3 out of the 8 wire to run it However once I went to start the truck I had no guages. Truck starts fine with the tach being the only guage that works, headlights work, power windows work, radio...
  19. 98.5-02 Non-Powertrain
    Even when the key is out of the truck as soon as I hook up the battery everything comes on. Radio, gauges, and cluster. The cluster is acting weird also, none of the gauges on it work but all the light down below do. Any idea what could be the problem? 1999 Dodge Ram 2500 24v
  20. 03-07 Powertrain
    My 2004.5 2500 has a 40 over cylinder bore just wondering if someone can tell me how much hp is gained from a 40 over bore?
1-20 of 32 Results
Top