Search Results for ‘codes’

Howdy! long time listener, first time caller. Had the truck out for a road trip and made it about 1k miles, then the CEL light came on. Scanned it and it threw P2000/p2BAC/p0141/p0054/p0381/p0036 Took it to the shop and they did a forced regen finding the DPF about 80% full, flushed the rad as...

I've read about tuners and gauge clusters and all the various add-on's that are out there but it seems that the ECM has all the readings that the add-on's are attempting to deliver. Wiring or plumbing to individual components seems to me to be duplicating what the ECM already knows. Is there...

A few weeks ago I made the dreaded mistake of overfilling my def..it went into countdown to limp mode and luckily made it to a dealer in time. They did there procedure and seemed to fix the issue. A day after picking up though my engine light came on. Just got a code reader and this is the code...

I have a 2010 6.7 i just purchased. I know little about the programming amd tuning of diesels. . The dealer said it had all been reprogrammed for this. Day 2 engine light comes on day 4 i get a code reader. Day 5 truck message center says to have exhaust serviced, filter full (but filter is...

Looking for a recommendation on a decent scan tool that won't break the bank for my Truck, basically want to read and reset codes....Bone stock 2011 RAM Diesel 2500. Thank you in advance....

Truck is still not cranking over I can’t pull the P codes-when I do the key on-off 3 times. when I turn the key on gear indicator lights nos coming up. when I test the cluster The gear indicator lights,trans over temp, and WTS light doesnot come on. and code C542 S35=315 flashes in the ODO...

I finished my valve body mods. I went for 2 test drives before remembering to pull the trans relay. All my gears shift fine. I still have codes that wont clear. 1693 0622 0743 1765 I do not have a check engine light. Should all the codes clear? Do I keep certain codes because of the mod? Or...

I have a 2004 3500 5.9 and when the mechanic put the computer on it, a code saying the fan clutch has gotten wet. The fan still kicks on and off like it should but it has been running warmer than normal at about the 220 range. We had a friend who this happened to also and her pickup is still parked.

i have a 2007.5 dodge ram 6.7 that i recently replaced injection pump as their was metal in the fuel filter as the truck was spluttering and poping and idleing rough also hesitating when steeping on throttle which the new pump fixed kinda the engine still somtimes on and off will shake bad...

OK Guys I hope someone can point me in the right direction. First off, my 2018 RAM 2500HD Laramie 6.7 Cummins truck runs just fine, everything works, and I do not have a snow plow. I mention that because some of the error codes I'm getting are related to snow plows, I don't have one and have...

Hey guys I'm new to the forum but I have alot of questions. I have 07.5 6.7 I blew a motor in (run hot). I swapped out with 08 motor same every thing. Problem is I'm showing codes p0202-P0206 all injectors 2 through 6 circuit stuck open and P0340 Cam position sensor bank1 sensor1. I've changed...

Hey guys, I recently put my dpf system back on my truck for inspection purposes. Ever since ive returned to stock i keep getting injector codes. Started with a P020A the other day. I cleared the code and then today it came back on along with a P020F. It started happening the day i flashed my...

Hi everyone, I am baffled and do not have a computer to tell me what to do. The stock 2013 Ram with 107,000 on it started acting up recently during a trip. Now I have lost boost and also power. The problem starts with the actuator. I took it off and checked the turbo “ all good “ actuator was...