Search Results for ‘apps’

Hey guys I usually just read these forum posts, but I haven't been able to find a solution for the issue I'm having. I have a 1999 Ram 2500 with compounds, 7x0.010 injectors, and a quadzilla. This all was recently installed so I think the quadzilla could have something to do with the issues at...

I have a 1999 Ram 2500, 24v with a 70 Dodge cab on it. When driving a few days ago, the truck will not accelerate anywhere close to how it was performing before. I can get up to 3rd gear then I seem to reach a limit in how high the RPMs can climb. The truck now is unsafe to drive due to how...

Hello ladies and gents. I am new to the 3rd gen world I come from 1st and 2nd gen cummins (12 valve) I got the truck and it was running great when I bought it and got half way home and check engine light came on got home scanned it with my scanner and it was p0121 for the apps weekend came and...

Hey guys, i have a 1998.5 (24v) 2500 ext cab, long box slt, pretty stock as far as aftermarket parts go, when accelerating slowly from idle, and start to hit 1400-1600 rpm range(or when at cruising speed in this rpm range), the rpm's will drop right to idle as if you were to lift your foot right...

My main question: Is it possible To have random grounding issues from the pcm? OR do I have a grounding problem elsewhere? My past experiences with ECM/PCM's have always been, all or nothing... This week's issue: Intermittent and/or dead throttle response. Codes 2127, 2121. Installed and...

Few months ago, I had a problem with the factory APPS “running away” or going straight to redline when I just tap the pedal, after some research I replaced it with a cheap Chinese sensor, and did one of the rewires, eliminating the long ground wire to the passenger battery, and wiring the...

I'm hoping someone can help me with the part number for connector that plugs into the APPS. I want to have a spare before I start messing my existing one. Thanks in advance.

Hey all, first off love the site and I have gotten tons of good info off here for both my trucks, 01 ram and 16 ram. But alas I am at a point at which I am thinking about putting a for sale sign on the 01 ram. Here is what has been done. It started about a year ago with the truck Hunting gears...

First time posting. 2001 Dodge Ram 3500 slt Laramie 4x4. So, I have been having this problem for the past couple of years. Truck runs strong for 2 or 3 days and then I get the dead pedal. You can readjust the battery cables and and retighten and it will normally go 2 or 3 days without any issue...

So a while back, i was driving my truck, (2004.5 ram 3500 nv5600), and the throttle started bucking for about 5 seconds and stopped but it left a code, i think p0220 or p0222, i pulled the exhaust brake and snipped the wire going to the apps wire, the previous owner spliced it right at the ecm...

Its a 99 2500... it was running fine but now has a dead pedal issue going on and the only code is low voltage to the APPS. I have put 3 new apps in it with no success. Could an ECM problem cause this?

I've done tons of reading just want to get some input. The 08 6.7 w/ adjustable pedals takes a 2010 p/n accelerator pedal. I chased my tail for weeks to find the right part. At this time its $200 at Oreilly. Hope that helps someone. Issue: started as P2121, 2122 and 2127. Inspection of harness...

I have the 04 5.9 Cummins and have been having throttle issues. I would lose throttle while driving then it would randomly come back after sometimes up to 10 seconds. Replaced the APPS/TPS sensor and now the throttle response is constantly patchy and very delayed. We tried the whole “resetting...