Dodge Cummins Diesel Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 29 Results
  1. 2013-2018 Powertrain
    I have had the trucks egr cooler got a Crack (obviously lol) but I finally got everything and removed the egr and blocked it off and re routed the lines but hop in the truck and on ez lynk shows zero communication with turbo actuator, turbo still spools and can still hit higher 20s lbs just...
  2. 07.5 - 09 3rd Gen 6.7 Liter General Discussion
    Might be a stupid question, but what generation does the 2009 6.7 belong to? 3rd or 4th? Or neither?
  3. 2013-2018 Non-Powertrain
    Hi i have a 2017 ram 2500 and recently I had the dealership put in remote start which requires a new hood latch. I noticed a couple days after the driver side of the hood sits a bit higher. I used the bump stops to adjust and it didn’t do much. Could the hood latch not be in where it was before...
  4. 2013-2018 General Discussion
    I currently own a 2003 ram 2500. 5.9. It has been a great truck but it getting pretty rusty and needs some body panels and a bed and some doors 😂 Its not terrible yet but a lot of work needs to be done soon. Looking into buying a newer truck in the less than 40,000$ range. Im just looking for...
  5. 98.5-02 General Discussion
    Need some help from someone who has done this I purchased a 4th Gen. Bumper off of Amazon but a lot of the brackets are missing I'm not talking about the mounting brackets, I'm talking about the inner bracket housing stuff and I don't even know what it's called where can I get this? Please help :(
  6. 2010-2012 Non-Powertrain
    So just like my last topic, Im not sure where to start. This truck was always my daily, but starting in Nov21 I quit my job and started using the pickup to hotshot oilfield pipe. Limiting this topic just to my coolant and heating problems: Now that its winter, the problems are really showing...
  7. 98.5-02 Non-Powertrain
    Hey guys, so I know with some brackets one can put a fourth gen front bumper on their second gen. What I was wondering is would those same brackets also work for aftermarket fourth gen bumpers, and if so has anyone done this before? I realize that some possible modifications would need to be...
  8. 2010-2012 Non-Powertrain
    Can someone help me find an air intake setup that is a metal pipe from air filter to turbo vs plastic in most cases. I'm having hell finding any kits that are metal. Preferably an "open" style filter compared to an enclosed filter like S&B. Any help is greatly appreciated y'all!
  9. 2010-2012 Powertrain
    Just bought a 2012 2500 st and the engine brake does not work. When I turn it on i get no extra deceleration and drives just as if it was off. On start up it doesnt sounds like the turbo is even spooling up to begin with? This is my first diesel truck and am looking for ways to troubleshoot the...
  10. 2013-2018 General Discussion
    Alright everybody, This is about to be long winded but this is a fix for the restarting dash issue with these trucks! I have had this issue for awhile and I found my resolution to fix it! I’ve read across other forums with people having the same issue so I am posting here. I have a 2013 2500...
  11. 2010-2012 Non-Powertrain
    Recently my PS steering pump went on the 2010 2500, I got a replacement and did everything - the job went really smoothly up until the bleeding process... I tried what feels like every imaginable method to try and bleed the air completely out. Although I got very close - there is still some air...
  12. 4th Gen Cab & Chassis
    Hello, I am looking for any advice in regards to my 2012 4500. Recently the other night I noticed the running lights on the passenger side of my truck not working.(front amber and 2 red rear lights). My turn signals and brake lights work fine but parking/running do not. I have checked every fuse...
  13. 2013-2018 Powertrain
    So I have a 2017 Ram 6.7 with 155000 miles. I love this truck but just this past week when the turbo begins to spool it makes a gurgly sound. Sorry but that’s the only way I can explain it. Today I used the exhaust brake and when it activates I get a loud squealing noise. I am no mechanic so...
  14. 2010-2012 Non-Powertrain
    I have a 2012 6.7 Cummins. The truck Idles crazy! When I start the truck it runs fine for about 15 seconds then starts to get choppy. I replaced the FCA with the Bosch replacement (ORiellys and dodge want 3x the amount for the new brand). I also replaced the pigtail and connector as the...
  15. 2010-2012 General Discussion
    Just turned 16 on may 15th. Looking for my first truck, preferable a diesel one. Leaning towards 3rd and 4th gen cummins. Also would like some info on duramax. Just want to know what is my best bet whether it being cummins or duramax. If it is cummins, 3rd or 4th gen? As well as which year of...
  16. 4th Gen Tire and wheel
    While back had a set of 16x12 Mickey Thompson class iis on a 2nd gen of mine, would love to have that look back on my 2010 4th gen. However I am aware that the smallest rim size on these trucks is a 17 due to the calipers. Has anyone gotten around this to fit 16s? I’ve considered maybe retro...
  17. 2010-2012 Non-Powertrain
    I’m looking in to converting my DRW 2010 to a SRW. I understand you will have to take the spacer off of the front wheels. Wondering if anybody has experience doing this? If so, what is the offset difference between the rear axle and the front axle without spacers? Also looking for rims and a...
  18. 2010-2012 Powertrain
    I'm looking into manual swap options once my 68RFE bites the dust. I'm leaning towards the NV5600 but need more clarification on a few items to be able to make a decision on the direction I want to go. Will the G56 Adapter Plate work for the NV5600? Will the 68RFE Tcase physically bolt to the...
  19. 4th Gen Performance Parts Discussion
    Hello everyone, I’m new to this group and new to tuning as well. I recently bought a 2014 ram 2500. Truck is fully deleted (DPF, EGR) but when looking into the truck I noticed it doesn’t have a VGT turbo, it has a second gen exhaust manifold and second gen turbo to a 5in exhaust. Not really sure...
  20. 4th Gen Performance Parts Discussion
    Hi all, looking at doing a 2nd gen swap on my 17 2500. I’m pretty set on the kit, 07-18 Cummins 6.7 Smeding Diesel S300 Replacement Non VGT Turbo with Manifold But I am wondering what else to add mostly for engine protection. I was looking at either ARP 625’s or I found a TrackTech(?) set that...
1-20 of 29 Results
Top