Search Results for ‘48re shifting issues’

I’m completely new to the forum side of the internet but I cannot find any solutions. I just had my transmission rebuilt with a BD stage 4 rebuild kit, Revmax stage 5 TC, and a reman valve body from transend. truck is basically stock aside from a few preventative maintenance items and i went a...

I bought a 2006 Mega Cab Dually, 4x4, with a cummins HO from a friend who Guaranteed it had a new Transmission and ran great!!!! Well you know what they say about friends and family.. So as you can guess it was a P.O.S.. All forward gears went out on the freeway coming home from the FIRST trip...

I’m having a problem with my 48re automatic transmission. I have replaced the governor, replaced solenoid with a ATS pressure solenoid with a new transducer. The bands are not bad either. It still wants to shift to 2nd around 2500 rpm and does not want to shift into third at all. I’m not to sure...

2005 Ram 2500 5.9 - 137K Miles Over the summer of 2022, my 2nd gear went out. We decided to do the rebuild ourselves. Since the transmission was going to be out, we decided to do some upgrades while it was out, listed below: Upgraded 2nd gear band New 2nd gear drum All new clutches and spacer...

I have a 2007 dodge 2500 5.9 Cummins with a stage 3 ATS 48re transmission with less than 50,000 miles, probably a month or two ago it started slipping when shifting into 3rd at about 30 mph. At the same time it threw code P0480 (fan control 1 circuit) and I’ve cleared it at least 10 times but it...

Hello everyone hoping I can get some help on here I have a 2007 ram 3500 with the 5.9 and 48re 3k miles ago we replaced the transmission with a new one it only made it 3k miles before we started having issues out of it , the truck will not shift below 3rd gear when coming to a stop or trying to...

Discussion Starter · #2 · a moment ago Hey everyone. Was starting this thread because my 2006 cummins has a tranny problem and I would like some reassurance that the transmission is not totally screwed. The truck starts off in 3rd gear from a stop. When I manually put it in 1st, and give it...

Hello guys, long time reader first time poster. I used my google account so don’t mind the profile pic it’s from way back in highschool lol So background here. Typical 48re problems, shuttle shift, limp mode, etc. started a year ago i replaced governor pressure solenoid & transducer all was...

Hi everyone, I’m new on here but y’all have helped me out quite a bit, thanks for that. Anyway I have a 2005 Dodge Ram 2500 with the 48re transmission and I know these trannies are known to have problems but I’ve owned other 3rd gens and none of them have been this bad. The PROBLEM….. when I...

I have a 2006 2500 and I’m having trans issues. I recently had a beefed up trans put in it about 3 months ago and I traveled from Indiana to florida pulling a fifth camper didn’t have an problem with it. When I got down here and started driving back and fourth to work (not pulling anything) I...

I have an 06 with the 48re 4x4 with 167k miles on it, nothing done performance wise to the engine just an intake and cat back pipe pretty much, transmission slips sometimes, recently it started making this very high pitched knocking/ticking sound and has gotten progressively louder, the shift...

Curious if anyone else has experienced this issue. I have an ‘06 2500 auto with the 48re. On occasion, which is becoming more frequent lately, my truck will not register electronically that is in Park. It will not register on the dash. The transmission physically shifts into park, but it doesn’t...

Hey everyone, new to the forum and I got a couple of questions. Just bought a 2006 2500 5.9 with 125k on it. I've been noticing since having the truck, the transmission has been shifting hard. Not bad... just slaps pretty good between shifts (but not all the time) and jerks pretty good when...

I’ve replaced the valve body plug, the throttle control valve $450 part, new transmission twice(warranty), 2 different valve bodies (warranty) I’m at a loss and can’t afford much more digging truck has new black water motor, new firepunk trans, new smeding second gen swap and 464 turbo, new...

2006 2500 5.9L6 truck was shifting fine with 0 issues. I did a body swap and now I have no codes, but the trans shifts late and harsh and seems to kick down to first right after going into 2nd (only does the kickdown at nearly wot). If I lift a bit it shifts as it should. I have replaced the...

Hey, so i replaced all my sensors in my 48re valve body, now its placed itself into reverse and wont shift or start. would be related to the hydraulics?

Hey everyone! This is my first time on the forum and I'm hoping y'all can help me out. I just got this truck a little over a week, maybe two weeks ago and since then the transmission has been weird. It's a 48re and the previous owner says it was rebuilt last year with a beefier torque converter...

hi I've been reading all the post I can some very helpful to begin got a hard 1755 code changed ttva relearn didn't work, no possible way to clear it scanner or battery disconnect ohmed entire harness personally cleaned all terminals including ECM and truck grounds took to aamco and dealer for a...