3rd gen

I really need some help locating someone who is capable of a custom transmission job. I have a 2003 ram 2500 quad cab lond box. I am trying to get Ford's new 10R140 swapped into the truck. I have not been able to find much information on doing this. Any help is greatly appreciated.

Hello all, new to the forum as well as to the Dodge family. I bought an 03 Dodge Ram 2500 4wd automatic with 260k miles with a 5.9L quad cab Completely stock. Truck had engine knocking as well as excessive white smoke coming out the exhaust when I bought it so I towed it home and had a diesel...

This is gonna be a long post guys so bear with me. This is my first post but I have read more forums at this point than I can count. This truck is becoming a bigger headache and PITA by the day so hopefully somebody has an idea for me of what to do. I have an 03 cummins 2500. This is my first...

Hi, I have read you can install a 2nd gen intake horn on the 3rd gens with two longer bolts. Looking at the 2nd gen Banks High ram and the 3rd gen Banks Monster Ram 3", the 2nd gen looks like it is wider (from pictures). Can anyone confirm this? They are pretty much the same price and I figured...

Hey yall, So my 03 24v died on me randomly while driving and wouldn't start again(no crank, nothing electrical worked, red light solid on dash) until I put jumpers on it for literally less than 10 seconds And it fired right up. Drove like a dream for the rest of the day. This morning I had the...

Hello all!! first time posting A few days ago I noticed my truck Cranking Over slowly, checked the batteries the Driver side cables were corroded till one day neighbor came over n noticed truck would crank but not start. He gave me a jump n still cranked slowly a few times but didn't start...

New here and somewhat new to the cummins fam, I just bought a 06 3rd gen 2500 5.9 24v (obviously), its got 190000 on it and i believe its stock other than a 5 inch turbo back exhaust, would it be safe to put a programmer on it? if so how much power could i add with stock internals. its a 6 speed...

Recently had injectors go out in my 09 3500, was curious if a set of 2012 injectors would work in a pinch with all my factory set up? Any ideas would help!

hey guys! I'm new to owning a diesel. I have a 2004 3500 with 260k. Its an automatic and had had some aftermarket work done to it. I know a decent am about gas fired motors but am new to turning wrenches on diesel motors. Where is a good place to start as far as to tell the overall health of my...

Changing out my exhaust housing on my turbo (he351cw). Was wondering if I needed to remove the entire turbo, or could I just remove the housing?

I have a crack in my electric shift t-case in my 2007 6.7. I found a NV273 DH3 t-case our of a 2003 2500 hemi. Will it fit in my 2007 6.7??

so i bought a 2005 dodge 3500 quad cab long bed 4x4 with the 5.9. what are some good first mods to do? also i need to replace my oil pan gasket and any tips or tricks would be much appreciated. I am a certified technician but i still consider myself a rookie tech so go easy on me thanks...

Found these wheels for pretty cheap on classifieds so I painted them and threw them on my truck, just wanted to show for others who were thinking of doing the same thing.

About a week ago I noticed my drivers rear door would not lock electronically on my 2009 3500 megacab srw. I have learned that it's common on these 3rd gen trucks and I plan on replacing the harness unless somebody knows a better way. This morning my wife went to start it and it lurched over...

Hi, I'm new to the forum; I've looked for post similar to this and haven't found anything. I have a 2006 Ram 2500 4x4, 135,000 miles, mostly stock Cummins except for MBRP exhaust and Airaid intake. I believe the truck also has a boost enhancing chip because of my increased fuel mileage and...

Hi all, looking for input from all you 6.7 guys. I currently have an 02 5.9 that is my daily driver, therefore I know very little about the 6.7. Having just started my own excavation business, and regularly towing 12k+ lbs., I am feeling the need for a dually. I really need something reliable...

I have owned an Edge Insight CTS2 monitor for 4 years now and love the monitoring capabilities as well as the many little extras included such as maintenance manager and data logging. My truck is EFI Live tuned so this is just the insight monitor, not the evolution. Since I have owned the...

I run hotshot and stay on the road my truckers deleted and iv just replaced all 6 injectors a few weeks ago 8k miles This morning I fired up to run the ac probably 2 hrs or so idling When I went to leave the truck was falling on its face tryn to pull out of the parking lot turned around and...