|Topic Review (Newest First)|
|Yesterday 03:37 PM|
|elephantrider||i went ahead and ordered one from @deereguy. it has the '19 hd's in the drop down, so i got one on the way.|
|11-16-2019 04:07 PM|
Originally Posted by silver60 View Post
|11-16-2019 11:57 AM|
|dbow20||Has anyone had success with bleeding the ABS on a 2014+ truck?|
|11-14-2019 02:43 PM|
Jimmy07 You were absolutely right, it was the security gateway interfering with AlphaOBD.
I tried with a Z automotive bypass module I happened to have around, and It let me change tire size, led lighting etc. in a snap.
The only problem is the SGW module is mounted behind the radio, so I have to take the radio out to reach for the SGW, unplug it and plug the Z automotive bypass, do the AlphaObd thing and then reconnect the SGW and put all console back together.
It worked like a charm.
|11-14-2019 02:39 PM|
|dbow20||I set the high discharge headlamps to yes and I think the flickering is gone. I will investigate more tonight when it’s dark. However, I think with that setting enabled the DRLs are the same intensity or brightness and the low beams when the lights are on. I don’t think it’s a big deal just an observation.|
|11-14-2019 10:42 AM|
|11-14-2019 10:19 AM|
Originally Posted by CR_Hunter View Post
|11-14-2019 01:02 AM|
Originally Posted by Ryan2242 View Post
Look up OBDLink MX ($59), get an Android tablet or phone, down load Alpha OBD from the App Store.. if u have an 18 or 19, u need the security bypass cable
|11-14-2019 12:22 AM|
17' CCSB 4X4 68RFE 2500 6.7 Tradesman DRP EGR delete, CTT tuning w/TCM tuning, UAQ w/7 speed HVAC, 7" premium EVIC, OEM front Parksense, OEM style front camera, aux switches, OEM remote start
|11-13-2019 10:33 PM|
|dbow20||Ok, I’ll give that a try.|
|11-13-2019 10:31 PM|
|11-13-2019 10:18 PM|
|dbow20||Has anyone noticed the passenger side DRL flickering? I have LED bulbs and have the DRLs set to low beams. I am wondering if maybe the voltage sent to the low beam for DRL is causing the flickering because it does not flicker when lights are set to on.|
|This thread has more than 12 replies. Click here to review the whole thread.|