|Topic Review (Newest First)|
|09-16-2019 08:59 AM|
Essk is where I found. They are in sask. I’m in Manitoba. I’ll check out the other website when I get a chance.
|09-16-2019 08:38 AM|
Here’s a link.
I have also ordered from Ess K Customs. Manitoba I believe.
Here’s a link.
BTW. Nothing good quality is cheap.
|09-16-2019 07:40 AM|
Trying to look for cheapest option here in Canada. So far looking at around $660 plus taxes for hid lows and the Morimoto fogs.
|09-14-2019 02:01 PM|
|09-14-2019 01:57 PM|
Originally Posted by Mike D Texas View Post
I installed my kit per the manufacturer’s recommendation. I drilled the holes. I used the rubber grommets.
|09-14-2019 01:23 PM|
|Mike D Texas||
I didn’t drill mine. The wires are small enough to come out of the side of the cover.
For the naysayers, there is NO comparison between a quality HID and projector setup vs halogen of any kind or even high end HIDs.
Sent from my iPhone using Tapatalk Pro
|09-14-2019 12:04 AM|
|09-13-2019 11:56 PM|
Like for like. Of course I’m kidding.
I might have to invest in some. Did you have to cut the dust cover on your lights to install?
|09-13-2019 11:48 PM|
@Abudett You’re kidding right??
You’re gonna call me on 15’? Come on. I’m just back from my original photo.
Look at the photos. Look at the light difference!!!
Original lights were OEM 9012 bulbs in projectors and OEM 9005 in Brights.
As my truck has Projectors, on low Beam, they’re 1/2 open. On High Beam they’re full open.
My HID bulbs are 5000k color.
My Brights are still Halogen PIAA Extreme White Plus 9005. They really don’t even come into play on bright.
LEDs are LEDs.
BrightSource Light Bar 10,000 Lumins. All spot.
Aurora Fog cubes are All Flood. 3250 luminous each. Pointed at ditches.
Not sure what my Morimoto in bumper XB LED Fog lights are.
|09-13-2019 11:28 PM|
Not so brite
You were further back in the new photos compared to the old.....
So you’ve got hid lows? And what for the high beam? And led fog? All what light temp? And they visually look the same colour from the front?
|09-13-2019 11:26 PM|
Not so brite
Okay Naysayers. Here we go. Virtually same place. Same time of year. I may as well post all light modes now.
Crappy OEM Halogens. Low Beam.
New 55w Morimoto HID’s. Low Beams
HIDs and Morimoto Fog lights. Low Beam.
HIDs High Beam.
HIDs High Beam with BrightSource Light Bar and Aurora Fog Cubes.
Morimoto XB LED (in bumper) Fog Lights alone.
Put that in your pipe and smoke it!
If that doesn’t make you want to order some HIDs and change out your “candle light” OEM Halogens, nothing will.
I’ve had my Morimoto HIDs in my truck over 4 years. Absolutely flawless performance.
Sent from my iPad using Tapatalk
|09-13-2019 10:55 PM|
Originally Posted by slayerfish View Post
I’ll get out and take a picture as close to the place I can and post it.
|This thread has more than 12 replies. Click here to review the whole thread.|