|Topic Review (Newest First)|
|09-12-2019 12:51 AM|
|evildiesel||Yes sir that is 100% the fan clutch wires. Replace with a new fan clutch.|
|09-11-2019 02:39 PM|
|Jakedrums||Obviously, that's what it was. Took me awhile to find the broken connection, and I have plenty of cable left to splice with. Does anyone have a good picture of how it's routed to the fan? Where the bracket attaches? Thanks for the help.|
|09-09-2019 10:04 AM|
|Jakedrums||24hrsparkey, is it possible to splice this? Or do I need a new clutch?|
|09-09-2019 08:55 AM|
Originally Posted by Jakedrums View Post
Those wires ( against ALL COMMON SENSE ) travel up to the fan side of the rad , and connect to the center of the fan clutch. The wires control fan lock up vs operating conditions vs Ac .
Even properly installed the tube with the wires is only like 1/2 - 1" away from the fan and the tremendous airflow it creates .
|09-09-2019 01:24 AM|
|tryNto||Yeah, that is the crappy. Fan Clutch wiring.|
|09-08-2019 08:28 PM|
|Jakedrums||Iím struggling with where the broken wires came from, i.e. plug. More pics show the cable enclosed in sheet metal.|
|09-03-2019 03:58 PM|
That does look like a fan clutch harness. They can get sucked into the fan where the wires are cut. Happened to my friends truck and unfortunately took out his radiator too. I just replaced my fan clutch with an after market part (Hayden 3282) and it's keeping my AC and transmission much cooler now. Here's the thread from my project.
|09-03-2019 02:55 PM|
|Jakedrums||second pic is the connection|
|09-03-2019 10:46 AM|
|24hrsparkey||Looks like the wires that at one time went to the electronic controlled fan clutch .|
|09-03-2019 09:58 AM|
Need help -broken connection
2006 5.9L 24v-had many challenges recently. I finished water pump replacement and flush on Monday and noticed this broken connection hanging. Cable with (I believe four wires) encased in a piece of sheet metal connects to a plug by the front of the oil pan. Any ideas? Thanks for any help! tim