|Topic Review (Newest First)|
|05-09-2019 03:15 PM|
Originally Posted by tnt_motorsports View Post
|05-09-2019 01:31 PM|
Originally Posted by SeventyGTX View Post
|05-08-2019 10:25 AM|
You bent your belt moldings? With the windows down, they should just lift right off after you remove the screw.
|05-08-2019 02:46 AM|
|duncan1||Looks a lot better now. I would use a DA polisher and polish to remove the yellowing.|
|04-29-2019 12:54 AM|
|adam909||you could go and have a wrap put on... probably pretty cheap and simple..|
|04-28-2019 06:10 PM|
Better but not done...
So I put some elbow grease into the pillars today with "Goof off" and it certainly looks better. I have even used some buffing compound to try and help. I am going to have to keep after it. The paint under the wrap is yellowed. It is certainly better without the black but clearly I'm not done yet. Any other tricks you guys have? Thanks in advance!
|04-28-2019 10:30 AM|
Well thanks so much guys for the advice. I spent about an hour yesterday peeling off the black wrap. The truck already looks better. Now I need to go after it with a little more "Goof off" and get all the glue off. Once that's done a buff and wax and I hope it matches.
|04-23-2019 05:10 PM|
|Loki223||Yeah, remove 'em truck looks better without them IMHO|
|04-21-2019 02:55 PM|
|tnt_motorsports||Thanks very much! I'll give it a shot.|
|04-21-2019 10:45 AM|
This was my solution...
They weren't cracked yet, but... Florida
Originally Posted by RoadRunnerTR21 View Post
|04-19-2019 09:33 AM|
Trim is cracking and peeling
Hi guys I am wondering if any of you have had the "vinyl" trim crack and peel on the doors of your truck before. If you did any ideas on what to use to replace it? I was thinking painting mine but wanted to get feedback from you guys.
I have attached a couple pictures for reference. Sorry for some reason the pictures turn sideways...