|Topic Review (Newest First)|
|Yesterday 11:00 AM|
Originally Posted by SRich12 View Post
|Yesterday 01:34 AM|
|SRich12||AlfaOBD makes changes to the BCM so it does not affect the ECM which is where your tuning is.|
|11-20-2019 11:37 PM|
If you are tuned/deleted and make changes with AlphaOBD, do you have to re-flash your tune after or is it unaffected by the changes made with AlphaOBD?
|11-19-2019 01:49 PM|
Correct LED setting on the low beams does not shut off the PWM. The HID setting on low beams shuts off PWM.
LED setting on any of the other lights does shut off PWM on those lights.
|11-19-2019 08:15 AM|
Originally Posted by Sledneck150 View Post
|11-18-2019 09:56 PM|
|Sledneck150||which Alfa OBD would I need to buy for a 2015 Ram 2500?|
|11-18-2019 04:21 PM|
|hink||For the record -- setting LED on any of the light groups will disable PWM (cause of the flickering)-- HOWEVER, for the low beams you must ALSO enable High Intensity Discharge lamps. That's the option that disables PWM on the low beams. All my lights are replaced with LEDs and i have zero flickering and zero light out messages.|
|11-17-2019 03:37 PM|
|elephantrider||i went ahead and ordered one from @deereguy. it has the '19 hd's in the drop down, so i got one on the way.|
|11-16-2019 04:07 PM|
Originally Posted by silver60 View Post
|11-16-2019 11:57 AM|
|dbow20||Has anyone had success with bleeding the ABS on a 2014+ truck?|
|11-14-2019 02:43 PM|
Jimmy07 You were absolutely right, it was the security gateway interfering with AlphaOBD.
I tried with a Z automotive bypass module I happened to have around, and It let me change tire size, led lighting etc. in a snap.
The only problem is the SGW module is mounted behind the radio, so I have to take the radio out to reach for the SGW, unplug it and plug the Z automotive bypass, do the AlphaObd thing and then reconnect the SGW and put all console back together.
It worked like a charm.
|11-14-2019 02:39 PM|
|dbow20||I set the high discharge headlamps to yes and I think the flickering is gone. I will investigate more tonight when it’s dark. However, I think with that setting enabled the DRLs are the same intensity or brightness and the low beams when the lights are on. I don’t think it’s a big deal just an observation.|
|This thread has more than 12 replies. Click here to review the whole thread.|