Turbo Spec Compilation - Dodge Cummins Diesel Forum
98.5-02 Performance Parts Discussion Discussion of Performance Parts For the 98-02 Trucks No Advertising ...NO ADVERTISING

 1Likes
Closed Thread
 
LinkBack Thread Tools Display Modes
post #1 of 33 (permalink) Old 03-21-2013, 04:15 PM Thread Starter
Diesel Head
 
ghostman's Avatar
 
Join Date: Jun 2008
Location: Victoria, TX
Posts: 6,799
Thanks: 848
Thanked 1,212 Times in 944 Posts
iTrader Score: 6 reviews
Turbo Spec Compilation

I know I'm missing some, I would like to keep this as accurate as possible. If you have not doubt in your mind and can even back it up, let me know the specs to the ones I'm missing and I'll add them.

Borg Warner

S200
Turbine Wheel
61.5/69.5, 64/74
Comp Wheel
56/80--------58lbs/min
59/80--------61lbs/min
Housings
T3- .55, .70, .76, .85

S300
Turbine Wheel
65/xx, 68/76, 71/80, 73/80
Comp Wheel
57/83--------61lbs/min
60/84.5------68lbs/min
62/88--------72lbs/min
63/87
64/92.5
66/91.5------76lbs/min
71/105.5-----86lbs/min
Housings
T3- .55, .70, .85
T4- .83, 0.88, 0.91, 1.0, 1.10

K31
Turbine Wheel
74/83
Comp Wheel
71/100-------95/bs/min
Housings
T3- .76
T4- .85, 1.0, 1.10

S400
Turbine Wheel
74/83, 77/87, 80/87, 82/87, 82/92, 88/96
Comp Wheel
63.5/91.4----75lbs/min
66/91.4------
71/100-------89lbs/min
75/100-------100lbs/min
76/107-------104lbs/min
78/110
80/116-------120lbs/min
83/119
88/xx
91/xx
Housings
T4- .90, 1.0, 1.1
T6- .90, 1.10, 1.25, 1.32, 1.51

S500
Turbine Wheel
99/110
Comp Wheel
80/xxx
86/xxx
88/120-------145lbs/min
91/120-------155lbs/min
95/131.5-----160lbs/min
98/xxx
Housings
T6- .85, 1.0, 1.15, 1.45, 1.60

Holset

H1C&WH1C
Turbine Wheel
52/65.5
Comp Wheel
45/xx
50/xx
52/xx
54/xx
56/xx
Housings
T3- 22cm, 16cm, xx

HX30
Turbine Wheel
58/70
Comp Wheel
44/73--------45lbs/min
Housings
T3- 6cm

HY35
Turbine Wheel
58/65
Comp Wheel
54/78
Housings
T3- 9cm

HX35
Turbine Wheel
58/70
Comp Wheel
54/78
54/83
56/83--------52lbs/min
60/86--------65lbs/min
62/86
Housings
T3- 12cm, 14cm, 16cm

HX40
Turbine Wheel
64/76
Comp Wheel
58/83
60/83
60/86--------65lbs/min
62/86
Housings
T3- 16cm, 18cm
T4- 16cm, 17cm, 18cm, 19cm, 21cm

HE341
Turbine Wheel
58/65
Comp Wheel
54/xx(?78?)
Housings
T3- 9cm

HE351
Turbine Wheel
58/65
Comp Wheel
60/86-------65lbs/min
Housings
T3- 9cm

HX50
Turbine Wheel
xx/xx
Comp Wheel
62/99
66/99
67.5/99
Housings
xxxx

HX52
Turbine Wheel
70/84
Comp Wheel
64/99
66/99
67.5/99
71/99
Housings
T4I- 16cm, 25cm

HX55
Turbine Wheel
73/xx, 77/86, 80/86
Comp Wheel
66/98
67/99
65/100
72/xxx
Housings
T6- 19cm, 22cm, 25cm

HT3B
Turbine Wheel
86/97
Comp Wheel
73.5/109
Housings
T6- 23cm, 26cm, 32cm

HX60
Turbine Wheel
86/97, 90/97
Comp Wheel
76/102
80/112
Housings
T6- 23cm

HT4B
Turbine Wheel
88/118
Comp Wheel
83/127
88/139
Housings
T6- 41cm
T6i- 26,28

HC5A
Turbine Wheel
xxx/xxx
Comp Wheel
87.5/127
88/139
Housings
T6- 41cm

HX82
Turbine Wheel
94/126
Comp Wheel
82/140
Housings
T6- 22cm, 25cm, 32cm, 36cm, 41cm, 48cm

Garrett

GT35
Turbine Wheel
62/68
Comp Wheel
61.5/82------67lbs/min
62.5/82.5----75lbs/min(GTX)
Housings
T3- .63, .82, 1.06
T4- .63, .82, 1.06

GT37
Turbine Wheel
64/72.5
Comp Wheel
55/76-------50lbs/min
59/82-------56lbs/min
61.5/82-----67lbs/min
63.5/88-----68lbs/min
65/88-------71lbs/min
68/94-------80lbs/min
Housings
T3- .89, .99, 1.11
T4- 1.12

GT40
Turbine Wheel
68/77
Comp Wheel
63.5/88------68lbs/min
65/88--------71lbs/min
68/94--------80lbs/min
Housings
T4- .85, .95, 1.06, 1.19, 1.34

GT42
Turbine Wheel
75/82
Comp Wheel
70/94--------84lbs/min
70.5/94------98lbs/min(GTX)
75/102-------96lbs/min
76/102-------114lbs/min(GTX)
Housings
T4- 1.01, 1.15, 1.28, 1.44
T6- 1.01, 1.15, 1.28

TV4502
Turbine Wheel
78.5/85.5
Comp Wheel
65.5/91
Housings
T6- 1.22

GT45
Turbine Wheel
80/87
Comp Wheel
80/108------112lbs/min
80/108------127lbs/min(GTX)
Housings
T4- 1.01, 1.15, 1.28, 1.44

GT47
Turbine Wheel
84/93
Comp Wheel
80/108------112lbs/min
88/118------140lbs/min
Housings
T6- .96, 1.08, 1.23, 1.39

GT50
Turbine Wheel
91/99
Comp Wheel
81.5/118
Housings
??

TV8401
Turbine Wheel
97/108
Comp Wheel
84/117
Housings
T6- 1.23

TV8403
Turbine Wheel
101.5/111.5
Comp Wheel
88.36/116.84
Housings
T6- 1.23, 1.39

GT55
Turbine Wheel
102/111.5
Comp Wheel
84/123
88/118------165lbs/min(GTX)
89/118.5----145lbs/min
91/133------153lbs/min
91/133------167lbs/min(GTX)
94/133------160lbs/min
94/133------181lbs/min(GTX)
106/141-----185lbs/min
Housings
T6- 1.0, 1.18, 1.24

GT60
Turbine Wheel
118/129.5
Comp Wheel
106/141-----185lbs/min
Housings
T6- 1.25


Two second gens with lots of mods and a 3rd gen just getting started

Last edited by ghostman; 01-22-2014 at 03:20 PM.
ghostman is offline  
The Following 23 Users Say Thank You to ghostman For This Useful Post:
2001Belc (05-16-2014), Anklh (06-28-2015), ben (01-22-2014), BigRed2500 (01-23-2014), blackkawi400 (01-22-2014), Broaner (01-01-2014), Calibratedpower.com (03-22-2013), Chuck Norris (03-22-2013), City Rat (07-20-2018), Clunk (01-22-2014), crazytexas86 (03-25-2014), CumminTryMe (07-23-2013), dspoon (05-25-2014), eforbes (04-04-2013), jeffsqartan (06-11-2015), jlbayes (01-21-2014), martin360 (03-10-2014), N1NJ4ON3R (04-11-2014), Noah Serynek (03-22-2013), stacked cummins (06-01-2015), TEX (02-02-2014), thehulk99 (01-21-2014), WillM (04-03-2013)
Sponsored Links
Advertisement
 
post #2 of 33 (permalink) Old 04-03-2013, 06:09 PM
Newbie
 
Coxey Diesel's Avatar
 
Join Date: Jun 2012
Posts: 42
Thanks: 6
Thanked 8 Times in 7 Posts
iTrader Score: 0 reviews
Edit: stupid question
Coxey Diesel is offline  
post #3 of 33 (permalink) Old 04-03-2013, 06:57 PM
Western WA President
 
jigabop's Avatar
 
Join Date: Jul 2008
Location: Renton, WA
Posts: 8,439
Thanks: 1,356
Thanked 1,987 Times in 1,417 Posts
iTrader Score: 0 reviews
H1C and WH1C

8 blade compressors that can be either:
45mm, 52mm, 54mm, or 56mm inducers.

the turbine side is identical and wheels are interchangeable with the hx35. housings differ slightly by bolt count on the back.. 2 less bolts. Far less efficient turbos than the hx35 that replaced it, commonly found on first gen trucks.

the intercooled first gens had a larger compressor wheel than the non intercooled version.


dunno if you wanna add that to your list or not...

00 24v powered by the high performance "53" block and "Unicorn Injectors" 576hp/1285tq 8/10/2013
2004 Jetta TDI 5spd Malone S1 + dyn EGR/idle tune
Quote:
Originally Posted by DieselDon16 View Post
my truck is literally full of Panties already...
Quote:
Originally Posted by 'strokeThis_'07 View Post
I'll admit, I was sitting here giggling like a little girl
jigabop is offline  
The Following User Says Thank You to jigabop For This Useful Post:
Capt. Slow (04-03-2013)
Sponsored Links
Advertisement
 
post #4 of 33 (permalink) Old 04-03-2013, 07:52 PM
Mule Barn Proprietor
 
jmd025's Avatar
 
Join Date: Jul 2008
Location: NAFWG
Posts: 11,118
Thanks: 3,543
Thanked 5,311 Times in 2,857 Posts
iTrader Score: 9 reviews
Quote:
Originally Posted by jigabop View Post
H1C and WH1C

8 blade compressors that can be either:
45mm, 52mm, 54mm, or 56mm inducers.

the turbine side is identical and wheels are interchangeable with the hx35. housings differ slightly by bolt count on the back.. 2 less bolts. Far less efficient turbos than the hx35 that replaced it, commonly found on first gen trucks.

the intercooled first gens had a larger compressor wheel than the non intercooled version.


dunno if you wanna add that to your list or not...
Never heard of a 45mm....have owned a few 50mms

Sent from the NAFWG executive office


This Machine Thrills Fascists
No more Cummings


jmd025 is offline  
post #5 of 33 (permalink) Old 04-03-2013, 08:31 PM
Western WA President
 
jigabop's Avatar
 
Join Date: Jul 2008
Location: Renton, WA
Posts: 8,439
Thanks: 1,356
Thanked 1,987 Times in 1,417 Posts
iTrader Score: 0 reviews
Quote:
Originally Posted by jmd025 View Post
Never heard of a 45mm....have owned a few 50mms

Sent from the NAFWG executive office
they are more common than you would think..

one of the turbos that you can find on a 4BT cummins. compressor and turbine size for the 4bt really depend on the purpose the motor was built for.

22cm^2 non gated turbine housing comes with the 45mm compressor.

as for the 50mm good catch, forgot that one

00 24v powered by the high performance "53" block and "Unicorn Injectors" 576hp/1285tq 8/10/2013
2004 Jetta TDI 5spd Malone S1 + dyn EGR/idle tune
Quote:
Originally Posted by DieselDon16 View Post
my truck is literally full of Panties already...
Quote:
Originally Posted by 'strokeThis_'07 View Post
I'll admit, I was sitting here giggling like a little girl

Last edited by jigabop; 04-04-2013 at 02:51 PM.
jigabop is offline  
post #6 of 33 (permalink) Old 04-04-2013, 12:09 AM Thread Starter
Diesel Head
 
ghostman's Avatar
 
Join Date: Jun 2008
Location: Victoria, TX
Posts: 6,799
Thanks: 848
Thanked 1,212 Times in 944 Posts
iTrader Score: 6 reviews
Thanks. I'll add it.

Two second gens with lots of mods and a 3rd gen just getting started
ghostman is offline  
post #7 of 33 (permalink) Old 01-20-2014, 11:47 PM
Cummins Fanatic
 
Join Date: Jan 2013
Posts: 133
Thanks: 6
Thanked 3 Times in 2 Posts
iTrader Score: 0 reviews
?

What other turbo would these turbo specs be equal to or close to. Garrett/AiResearch TV8102, 1.23 A/R T6 turbine scroll.
Intake Major: 108mm
Intake Minor: 78.5mm
Exhaust Major: 111mm
Exhaust Minor: 97mm
Intake Exducer: 2.75" ID, 3.5" OD, Hose style
Intake Inducer: 4.5" ID, 5" OD, Hose style
Exhaust outlet: 5" V-band

2005 Quad Cab 2500 Cummins - Leveling Kit / 18x10 ATXs 33 Mud Grapplers / 91,000 Miles/ Dual Black 7inch Stacks/ MP-8 & Smarty Tuner/ Arson III Kit,DAP 90hp Sticks, Air Dog 165, TDC Full Billet 48re / Factory Match Pyro, Boost, Fuel Rail ,Edge Insight
05Cummins89 is offline  
post #8 of 33 (permalink) Old 01-21-2014, 01:50 AM
Diesel Head
 
Headcase98002's Avatar
 
Join Date: May 2010
Location: Edinburgh, Indiana
Posts: 7,018
Thanks: 1,008
Thanked 1,004 Times in 853 Posts
iTrader Score: 9 reviews
The exducer on the 466 is 91.4mm you can also add the 464 which is 63.5/91.4 and flows 75lb/min. Also you have a .90 listed in the T6 housing. There are .90, 1.0 and 1.1 in T4.

1998.5 QCDRW - p24v 180hp pump, 6x.013's, ATS T4 Manifold, s363/68/.83 - HT4B, TunnelRam, BD Intercooler, Hamilton Springs/Push Rods, FirePunk Billet Trans, DPC 3150 TC, PowerStop, IssPro Gauges.

Last edited by Headcase98002; 01-21-2014 at 01:53 AM.
Headcase98002 is offline  
post #9 of 33 (permalink) Old 01-21-2014, 01:58 AM
vvv SOME PEOPLE'S KIDS vvv
 
cummins04.5handshaker's Avatar
 
Join Date: Jul 2009
Location: West TN
Posts: 11,153
Thanks: 2,451
Thanked 3,182 Times in 2,084 Posts
iTrader Score: 2 reviews
S300's have a T4 .91 twin scroll non gated housing, very common

GITT SUMMMM!!!
08 mega Laramie 4wd auto.. the white wagon baby hauler. EFI & Trans tuning.
04.5 w/compounds, dual fuelers and a lot of wasted money
'99 sport...G.O.N.E.
cummins04.5handshaker is offline  
post #10 of 33 (permalink) Old 01-21-2014, 02:10 AM
Diesel Head
 
Headcase98002's Avatar
 
Join Date: May 2010
Location: Edinburgh, Indiana
Posts: 7,018
Thanks: 1,008
Thanked 1,004 Times in 853 Posts
iTrader Score: 9 reviews
Also a .88 single scroll, .83 divided gated and non-gated, but I don't think there is a .85 in a T4. And if I recall, the 60mm s300 wheel flows 68lb/min.

1998.5 QCDRW - p24v 180hp pump, 6x.013's, ATS T4 Manifold, s363/68/.83 - HT4B, TunnelRam, BD Intercooler, Hamilton Springs/Push Rods, FirePunk Billet Trans, DPC 3150 TC, PowerStop, IssPro Gauges.
Headcase98002 is offline  
post #11 of 33 (permalink) Old 01-21-2014, 06:10 AM
Cummins Fanatic
 
Join Date: Jan 2013
Posts: 133
Thanks: 6
Thanked 3 Times in 2 Posts
iTrader Score: 0 reviews
Anyone

So does anyone have a turbo that I can compare the to for the specs I gave, I got my hands on the turbo and was thinking of using it

2005 Quad Cab 2500 Cummins - Leveling Kit / 18x10 ATXs 33 Mud Grapplers / 91,000 Miles/ Dual Black 7inch Stacks/ MP-8 & Smarty Tuner/ Arson III Kit,DAP 90hp Sticks, Air Dog 165, TDC Full Billet 48re / Factory Match Pyro, Boost, Fuel Rail ,Edge Insight
05Cummins89 is offline  
post #12 of 33 (permalink) Old 01-21-2014, 10:53 AM Thread Starter
Diesel Head
 
ghostman's Avatar
 
Join Date: Jun 2008
Location: Victoria, TX
Posts: 6,799
Thanks: 848
Thanked 1,212 Times in 944 Posts
iTrader Score: 6 reviews
Quote:
Originally Posted by Headcase98002 View Post
The exducer on the 466 is 91.4mm you can also add the 464 which is 63.5/91.4 and flows 75lb/min. Also you have a .90 listed in the T6 housing. There are .90, 1.0 and 1.1 in T4.
Quote:
Originally Posted by cummins04.5handshaker View Post
S300's have a T4 .91 twin scroll non gated housing, very common
Quote:
Originally Posted by Headcase98002 View Post
Also a .88 single scroll, .83 divided gated and non-gated, but I don't think there is a .85 in a T4. And if I recall, the 60mm s300 wheel flows 68lb/min.
Got 'em!

Two second gens with lots of mods and a 3rd gen just getting started
ghostman is offline  
Sponsored Links
Advertisement
 
Closed Thread

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Dodge Cummins Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome