650hp Build, Nuttin Fancy - Dodge Cummins Diesel Forum
94-98 Performance Parts Discussion Discussion of Performance Parts For the 94-98 Trucks No Advertising ...NO ADVERTISING

 4Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 124 (permalink) Old 11-23-2018, 01:14 PM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Pulling the trigger on a hopeful 650 build. I am going for streetable performance and occasional towing. (horses, TT, Equipment). Here's a list of what's been bought and collected and work planned. Not all necessary of course, but adding mods is addictive! Also, fixing things on my to do list as I go.
-I went with PDD Ultimate Towing Compound Kit. K27 and s369. Added Kobra Kai intake horn, and Blankets, and wrapped hot pipes
-PDD Turbo Tuner
-215 Pump from PDD with 7mm DV's, 4kGsk, and 20* (adjustable Ofv)
- 5x14 VCO from PDD
- Push rods from PDD
-Resurfacing and oringing head, med port and polish
-Steed Speed manifold with blanket
-Conical 165# springs from PDD
-Top hat valve seals
-AFC Live
-Modded lift pump from PDD (changed to PDD predator pump)
-ARP 625 studs
-Fluidamper, pinned
-850hp Built 47RH from PDD with triple disk, 2nd lockup, Billet flexplate
-Fuel sump with 1/2 lines
-1/2 lines from lift pump to filter, Filter to Pump (2 line feed)
-banjo bolt replacement kit
-5" SS MSRP exhaust, straight with FTE resonator, 8" Prius Repellent Tip
-Mishimoto stock replacement trans cooler
-Mishimoto Rad
- Billet Timing cover, Tappet cover
-Fleece coolant bypass
-Scheid tappet vent box
-2 twin vented Valve Covers for 2-3 and 4-5
-New vac pump and steering pump and lines
-Redhead steering box
-ss brake lines, hard and soft (braided)
-New rad fan, palstic from Genos
-BD exhaust brake inline, (have on board air)
-Kennedy Dual boost gauge (already have full gauge set)
-Drive pressure gauge
-24v Oil Pump
-Oem water pump
-Silicone Rad hoses
-380A alternator from Quality Power with external reg
-Mean Green starter
-SS throttle linkage
-BD cool down timer
-BD intercooler
-BD double stack trans cooler
-CBR oil cooler
-Engine oil pre-luber system
-Dual cat 2 micron fuel filters with Baldwin water separator and 100 mesh screen

I'm driving up from Los Angeles area to Power Driven Diesel in Utah as soon as they are ready to install the tranny. I'll have them install the coolant bypass at that time because the tranny will be out. They are going to get rid of the plastic cooler line clips as well.
When that is completed I'll pull the head off and get started!
I'll make periodic updates. Should be fun!


95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch

Last edited by Fire god; 10-19-2019 at 01:05 AM.
Fire god is offline  
Sponsored Links
Advertisement
 
post #2 of 124 (permalink) Old 11-25-2018, 12:52 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Added the BD intercooler to the list. Should be here in a few days. Replacing the condenser as well since it's messed up a little.

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #3 of 124 (permalink) Old 11-25-2018, 10:12 AM
Diesel Freak
 
Join Date: Nov 2013
Location: Maine/AZ
Posts: 855
Thanks: 103
Thanked 29 Times in 28 Posts
iTrader Score: 0 reviews
Looks like fun.
Do you tow?
Hope you document this build, it is difficult with so much to do.

'98 Ram 3500 12v 4x4, triple disc/47RE, 3.54s, 16*, K27, 055, 5 x 0.011, AFC live
'97 12v ECLB 4x4
'99 ECSB gasser
RamCumminsRob is offline  
Sponsored Links
Advertisement
 
post #4 of 124 (permalink) Old 11-27-2018, 10:34 AM
Diesel Head
 
Drothgeb's Avatar
 
Join Date: Feb 2010
Posts: 1,609
Thanks: 62
Thanked 324 Times in 250 Posts
iTrader Score: 0 reviews
Sounds like a nice build. I agree with the BD intercooler. Been running one for years and it frequently sees 85-90psi.

1995 4WD RCLB
10.66 sec, 128.93 mph
Under Construction
Drothgeb is offline  
post #5 of 124 (permalink) Old 11-27-2018, 01:02 PM
Cummins Nut
 
Join Date: Jan 2008
Location: Maui, HI
Posts: 408
Thanks: 30
Thanked 11 Times in 11 Posts
iTrader Score: 0 reviews
Quote:
Originally Posted by Fire god View Post
-I went with PDD Ultimate Towing Compound Kit. K27 and s300.
Stupid question : I'm assuming this is the k27/S369 compound setup?

thanks.

BJ

95 ECLB 4x4, DSS, HD X-over steering, auto., Hell bent 2.5" lvl, Thuren track bar, tabbed KDP, 4" MBRP, Otherwise all stock.
no_smokn is offline  
post #6 of 124 (permalink) Old 11-27-2018, 05:35 PM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
That's it. I need the faster spool for the occasional towing I do.

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
The Following User Says Thank You to Fire god For This Useful Post:
no_smokn (11-29-2018)
post #7 of 124 (permalink) Old 08-17-2019, 02:32 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Making some progress. Got the 215 maxed and balanced pump painted and the dual feed hooked up. Flows 550cc. Did the bushing mod on the throttle and replaced the ball and socket hardware. 7mm DV's
Attached Thumbnails
Click image for larger version

Name:	20190618_082108_1566019871241.jpg
Views:	49
Size:	311.8 KB
ID:	854301   Click image for larger version

Name:	20190705_193933_1566019899837.jpg
Views:	46
Size:	436.5 KB
ID:	854303  

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #8 of 124 (permalink) Old 08-17-2019, 02:36 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Turbo housings painted.
Oil cooler arrived and thinking of a bracket.
Engine mounts replaced.
Oil pre-luber installed
Attached Thumbnails
Click image for larger version

Name:	20190705_193020_1566020053297.jpg
Views:	57
Size:	310.0 KB
ID:	854305   Click image for larger version

Name:	20190705_193118_1566020078510.jpg
Views:	51
Size:	314.2 KB
ID:	854307   Click image for larger version

Name:	20190705_193136_1566020097914.jpg
Views:	51
Size:	344.9 KB
ID:	854309   Click image for larger version

Name:	20190718_134511_1566020159174.jpg
Views:	53
Size:	361.3 KB
ID:	854311   Click image for larger version

Name:	20190718_134441_1566020196036.jpg
Views:	53
Size:	275.8 KB
ID:	854313  


95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #9 of 124 (permalink) Old 08-17-2019, 02:41 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Installed Mean Green starter.
Built relay box.
Machined head for Top hat seals.
Machined off built in filter iron inside intake manifold.
Attached Thumbnails
Click image for larger version

Name:	20190802_185705_1566020384714.jpg
Views:	50
Size:	360.0 KB
ID:	854315   Click image for larger version

Name:	20190808_111557_1566020412872.jpg
Views:	51
Size:	395.4 KB
ID:	854317   Click image for larger version

Name:	20190808_184444_1566020436347.jpg
Views:	45
Size:	185.0 KB
ID:	854319   Click image for larger version

Name:	20190809_150446_1566020457826.jpg
Views:	49
Size:	440.2 KB
ID:	854321   Click image for larger version

Name:	20190808_184458_1566020482374.jpg
Views:	50
Size:	404.7 KB
ID:	854323  


95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #10 of 124 (permalink) Old 08-17-2019, 02:45 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Head O-ringed.
Valves lapped in.
165# springs with tool steel retainers and collets installed.
5x14 vco injectors installed.
Head machined.
Attached Thumbnails
Click image for larger version

Name:	20190809_141408_1566020687006.jpg
Views:	53
Size:	350.3 KB
ID:	854325   Click image for larger version

Name:	20190809_165150_1566020711121.jpg
Views:	49
Size:	395.0 KB
ID:	854327  

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #11 of 124 (permalink) Old 08-17-2019, 02:47 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Dual breathers.
Mirror intake.
Pump Installed. 20* timing.
Attached Thumbnails
Click image for larger version

Name:	20190810_182140_1566020791771.jpg
Views:	49
Size:	367.5 KB
ID:	854329   Click image for larger version

Name:	20190810_182544_1566020811998.jpg
Views:	44
Size:	239.3 KB
ID:	854331   Click image for larger version

Name:	20190812_124455_1566020835778.jpg
Views:	46
Size:	442.9 KB
ID:	854333  

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
post #12 of 124 (permalink) Old 08-17-2019, 02:50 AM Thread Starter
Cummins Nut
 
Fire god's Avatar
 
Join Date: Jul 2015
Location: So Cal
Posts: 470
Thanks: 1
Thanked 21 Times in 21 Posts
iTrader Score: 0 reviews
Updated oil pump.
Drilled and installed Cam retainer.
Pinned Dampner.
Dampner installed.
Attached Thumbnails
Click image for larger version

Name:	20190812_134741_1566020923973.jpg
Views:	37
Size:	351.8 KB
ID:	854335   Click image for larger version

Name:	20190812_134733_1566020956255.jpg
Views:	36
Size:	336.5 KB
ID:	854337   Click image for larger version

Name:	20190812_134738_1566020976782.jpg
Views:	35
Size:	291.0 KB
ID:	854339   Click image for larger version

Name:	20190814_173406_1566021011683.jpg
Views:	39
Size:	283.2 KB
ID:	854341  

95 3500 auto, bhaf, 4k, kdp, gauges, air bags, fuel htr delete, 33"s, dually spacers, 4.10 lim slip, 2" level, silicone hoses, tps delete, tcc switch
Fire god is offline  
The Following User Says Thank You to Fire god For This Useful Post:
MOJO (09-24-2019)
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Dodge Cummins Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome