Dodge Cummins Diesel Forum

Dodge Cummins Diesel Forum (https://www.cumminsforum.com/forum/)
-   3rd Gen. Powertrain (https://www.cumminsforum.com/forum/3rd-gen-powertrain/)
-   -   vb and billet part install needs specs (https://www.cumminsforum.com/forum/3rd-gen-powertrain/380200-vbulletin-billet-part-install-needs-specs.html)

bader 03-24-2011 11:37 PM

vb and billet part install needs specs
 
i am getting ready to install my new vb and other billet parts in my tranny but i want torque specs before i start. what is the spec for the vb bolts, and i got the billet intermediate servo and accumulator, and they sent me a front servo cover. whats the diffrence between the front servo and the 2nd gear servo? in this pic whats what?
http://i33.tinypic.com/i3tk5t.jpg

beecrazy 03-25-2011 12:08 AM

Bader

The valve body to case torque is 100 inch lbs (95-110), the valve body screws (#25 torx) are 40 in lbs.

In the upper left hand corner of the pic is the 2nd (aka "front") servo assembly. It is the same thing/different name. Back in the day it was called the "Kick Down Servo". It squeezes the band againts the drum to acheive second gear.

Don

bader 03-25-2011 12:24 AM

right i have come to see this but for some reason they sent me the sonnax super hold servo kit and the upgraded servo cover itself. but the super servo comes with a cover.

bobser1 03-25-2011 04:54 AM

The foward band/second gear/kick down (all the same names) is the servo near the front of the transmission. The servo close to the rear of the transmission is the low/reverse band. Hope this helps.


All times are GMT -4. The time now is 10:18 AM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome