Dodge Cummins Diesel Forum - View Single Post - Boost #s with arp head studs and 60 lbs valve springs
View Single Post
post #4 of (permalink) Old 05-22-2019, 12:16 PM Thread Starter
Join Date: May 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
My plan was to run 5x.016 or .018 injector nozzles, 60lbs springs, a borg Warner s362, and pusher intakes intercooler piping and cold air intake, and arp 425s, EGT’s aren’t really an issue, the most I’ve ever seen was 1150 climbing an extremely steep hill at an undisclosed speed but I rarely ever see over 1000 pre turbo, and we don’t have emissions laws in Kansas so a little smoke isn’t really an issue unless there is a cop in a bad mood but in that case I’ll probably see them before they see me and I’ll just keep my right foot in check

92 d350 Dually, originally owned by my great grandpa, gear vendors under/over drive, TR diesel fuel pin and 3200 rpm spring, 4 MBRP exhaust, Boost, 2200 pyro, and fuel pressure gauges, auto meter z-series tach and gps speedometer
C_conger04 is offline  
For the best viewing experience please update your browser to Google Chrome