Join Date: Oct 2007
Location: Philadelphia, PA
Thanked 363 Times in 151 Posts
in this pic you are measuring the distance between 1 and 2 aka the stud and the adjusting nut
Engine: Mahle "Marine" Pistons, Balanced Rotating Assembly, ECD Cam, O-Ringed Block, Ported/O-Ringed Head, 3 Angle Valve Job, ATI SuperDamper
Fuel/Air: 475cc P-Pump, 5x.014's, Airdog 150, BW 66/68/14
Last edited by Cowboy303; 11-13-2017 at 05:39 PM.
Reason: relink dead image