Dodge Cummins Diesel Forum

Dodge Cummins Diesel Forum (https://www.cumminsforum.com/forum/)
-   2013-2018 General Discussion (https://www.cumminsforum.com/forum/2013-2018-general-discussion/)
-   -   Alfa OBD Success! (https://www.cumminsforum.com/forum/2013-2018-general-discussion/2490261-alfa-obd-success.html)

Jimmy07 11-24-2019 04:28 PM

Quote:

Originally Posted by elephantrider (Post 29151023)
just got a note from alexey that the 19's arent supported yet.

While 2019s arenít technically supported yet, being that he hasnít gone through and made a specific list for it, you should still be able to connect and make common changes. Hereís an example of someone that changed tire size- https://www.cumminsforum.com/forum/5...ity-cable.html
Have you tried connecting to a 2017 body module?

ericdude101 11-24-2019 05:25 PM

Hello,

I recently purchased a MX+ and read on this thread that some people were able to read transmission data such as line pressure and lockup status but I cant seem to figure out how to do that. Does anyone have any insight?

Sent from my SM-G975U using Tapatalk

elephantrider 11-24-2019 06:35 PM

i only have one truck so can't test it on another. I read that switching where the connections on the terminal block may work but haven't tried that either.

Jimmy07 11-24-2019 09:48 PM

Quote:

Originally Posted by elephantrider (Post 29151197)
i only have one truck so can't test it on another. I read that switching where the connections on the terminal block may work but haven't tried that either.

I meant on AlfaOBD, connect to MY2016-2017 body computer. Definitely check for switched connectors on the terminal block. 2019 HDs use the same connector for CAN C and IHS now.

elephantrider 11-24-2019 10:36 PM

oh, yah, I getcha now 😅. no I actually didn't. next commercial break on the 9er's game I'll go try that and see.

customX 11-26-2019 09:06 PM

Has anyone had any issue's reprogramming mileage? My buddy bought my old EVIC cluster and I cannot get the mileage to take. AlfaOBD says success but the ODO never changes.

Jimmy07 11-26-2019 09:16 PM

Quote:

Originally Posted by customX (Post 29152997)
Has anyone had any issue's reprogramming mileage? My buddy bought my old EVIC cluster and I cannot get the mileage to take. AlfaOBD says success but the ODO never changes.

Yes, keep trying though. Make sure the interface is an MX. Also, do it with the truck in acc, not run. Keep trying in tenth mile increments +/- IE...100.5, 100.6, 100.4, 100.7, etc.

customX 11-27-2019 12:14 AM

Quote:

Originally Posted by Jimmy07 (Post 29153009)
Yes, keep trying though. Make sure the interface is an MX. Also, do it with the truck in acc, not run. Keep trying in tenth mile increments +/- IE...100.5, 100.6, 100.4, 100.7, etc.


It's an MX+. I will give that a shot! Thanks!

CR_Hunter 12-03-2019 10:41 PM

Quote:

Originally Posted by dbow20 (Post 29141739)
I have LED low beams enabled but maybe Iíll switch it to what you mentioned to see if it solves it.

Did you enable HIDs and the issue is resolved or continuing?

17' CCSB 4X4 68RFE 2500 6.7 Tradesman DRP EGR delete, CTT tuning w/TCM tuning, UAQ w/7 speed HVAC, 7" premium EVIC, OEM front Parksense, OEM style front camera, aux switches, OEM remote start

CR_Hunter 12-03-2019 10:44 PM

Quote:

Originally Posted by dbow20 (Post 29141981)
I set the high discharge headlamps to yes and I think the flickering is gone. I will investigate more tonight when itís dark. However, I think with that setting enabled the DRLs are the same intensity or brightness and the low beams when the lights are on. I donít think itís a big deal just an observation.

I did notice as well that the HID setting brings the DRL output to what looks the same as the low beams which I'm not a big fan of but I did not like them flickering so I have just gotten used to it. One day I might disabled HID and see if I'm able to step down the DRL voltage without flickering.

17' CCSB 4X4 68RFE 2500 6.7 Tradesman DRP EGR delete, CTT tuning w/TCM tuning, UAQ w/7 speed HVAC, 7" premium EVIC, OEM front Parksense, OEM style front camera, aux switches, OEM remote start

royta 12-07-2019 10:25 PM

I have a 2015 Laramie MC and ordered the cargo camera, which means the reverse camera shows in the rear view mirror instead of on the 8.4. The 2016s and later could show both cargo and reverse on the 8.4. Several years ago, the solution was customtronix or a lockpick. Any chance that AlfaOBD can work some magic?

Sent from my SM-G930V using Tapatalk

Jimmy07 12-07-2019 10:41 PM

Quote:

Originally Posted by royta (Post 29163375)
I have a 2015 Laramie MC and ordered the cargo camera, which means the reverse camera shows in the rear view mirror instead of on the 8.4. The 2016s and later could show both cargo and reverse on the 8.4. Several years ago, the solution was customtronix or a lockpick. Any chance that AlfaOBD can work some magic?

Sent from my SM-G930V using Tapatalk

Negative. Itís a software issue. Unless you have firmware 17.11.07, which had a glitch that allowed it for the 13-15 radios, it canít happen. Youíd need to swap in a 2016+ radio.


All times are GMT -4. The time now is 03:10 AM.

Powered by vBulletin® Copyright ©2000 - 2020, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome