wider rims

06cumminspower · 05-30-2008, 09:05 PM

i have a 2006 cummins with bushwacker pocket flares, i want to get blacked out rims that stick out at least 2 inches on each side of the truck to match the flares. I would like to keep the stock tires on the new rims, but what offset and backspacing should i do to make it wider? also does postive mm make it wider or negative make it wider?

__________________
2006 cummins HO, 4040xl aero turbine muffler, stock 4inch pipe to 6 inch tip. ICEBOX Cai. Edge Juice Attitude. Full Goerend Transmission.

dieseltracks · 05-31-2008, 11:32 AM

Moved from the Classifieds to the Tire and Wheel discussion forum.

__________________
Dave
02 2500 QC Longbed 4x4--Goerend Triple Disk TC/VB/Flexplate/Billet input--VA/TST PM3--FTE 100hp injectors--BD 3-pc ported manifold--HX35--95gph HPFP--4" exhaust with a 7" blowhole

BE SURE TO CHECK OUT OUR CF SITE SPONSORS FOR ALL YOUR PARTS NEEDS!!

05-30-2008, 09:05 PM	#1 (permalink)
06cumminspower Cummins Fanatic Join Date: Mar 2008 Location: colorado Posts: 107 Thanks: 0 Thanked 0 Times in 0 Posts 06cumminspower's Truck Pics	wider rims i have a 2006 cummins with bushwacker pocket flares, i want to get blacked out rims that stick out at least 2 inches on each side of the truck to match the flares. I would like to keep the stock tires on the new rims, but what offset and backspacing should i do to make it wider? also does postive mm make it wider or negative make it wider? __________________ 2006 cummins HO, 4040xl aero turbine muffler, stock 4inch pipe to 6 inch tip. ICEBOX Cai. Edge Juice Attitude. Full Goerend Transmission.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

05-31-2008, 11:32 AM	#2 (permalink)
dieseltracks Super Moderator Join Date: Jul 2007 Location: Flora, Indiana Posts: 4,709 Thanks: 4 Thanked 11 Times in 10 Posts dieseltracks's Truck Pics	Moved from the Classifieds to the Tire and Wheel discussion forum. __________________ Dave 02 2500 QC Longbed 4x4--Goerend Triple Disk TC/VB/Flexplate/Billet input--VA/TST PM3--FTE 100hp injectors--BD 3-pc ported manifold--HX35--95gph HPFP--4" exhaust with a 7" blowhole BE SURE TO CHECK OUT OUR CF SITE SPONSORS FOR ALL YOUR PARTS NEEDS!!