Leveling kit with 36's?

***99cumminsho*** · 03-21-2008, 12:24 AM

Im putting 2" coil spacers in the front and 1" wheel spacers all around will a 36x13.50 fit? the wheels are 16.50x10.

__________________
1999 2500 ext. cab 4x4, auto., 4:10 gears. Currently under construction build thread coming soon

POWERED BY: FARM BOYS DIESEL

CumminTryMe · 03-21-2008, 10:27 PM

I know the hieght will fit, but I can't comment on the width of the wheels and tire width. Control arm rubbing is what I'd be concerned with.

__________________
Red&Black 95 3500 QC DRW Built 47rh 2WD 4.10s

destry · 03-21-2008, 10:36 PM

i just have the 2" puck on 35's and mine rubs on sharp turns like in parking lots

__________________
24 valve with a couple goodies

***fergusonmichael*** · 03-24-2008, 09:34 PM

i had 315s on factory wheels at one point with 2.5'' leveling kit. They rubb some on full lock. the tires only measured like 34something. I think with spacers an 10in wide rims you will be rubbing everywhere. just my .02cents.

__________________
2007 2500 QuadCab 4x4 5.9L 48RE

s&b intake, cfm, 5in mbrp exhaust, airdog 100, diablo predator, isspro boost, pyro, fuel, rail & trans.

2.5in skyjacker leveling kit, 17x9 xd addict black 35s cooper st

03-21-2008, 12:24 AM	#1 (permalink)
*99cumminsho* UNDERCONSTRUCTION Join Date: Jul 2006 Location: Ft. Myers, FLORIDA Posts: 1,371 Thanks: 1 Thanked 0 Times in 0 Posts 99cumminsho's Truck Pics	Leveling kit with 36's? Im putting 2" coil spacers in the front and 1" wheel spacers all around will a 36x13.50 fit? the wheels are 16.50x10. __________________ 1999 2500 ext. cab 4x4, auto., 4:10 gears. Currently under construction build thread coming soon POWERED BY: FARM BOYS DIESEL

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

03-21-2008, 10:27 PM	#2 (permalink)
CumminTryMe Cummins Fanatic Join Date: Feb 2008 Location: Sioux Falls, SD Posts: 104 Thanks: 0 Thanked 4 Times in 4 Posts CumminTryMe's Truck Pics	I know the hieght will fit, but I can't comment on the width of the wheels and tire width. Control arm rubbing is what I'd be concerned with. __________________ Red&Black 95 3500 QC DRW Built 47rh 2WD 4.10s

03-21-2008, 10:36 PM	#3 (permalink)
destry Cummins Fanatic Join Date: Oct 2007 Posts: 142 Thanks: 0 Thanked 1 Time in 1 Post destry's Truck Pics	i just have the 2" puck on 35's and mine rubs on sharp turns like in parking lots __________________ 24 valve with a couple goodies

03-24-2008, 09:34 PM	#4 (permalink)
*fergusonmichael* Cummins Freak Join Date: Jun 2007 Location: Hemphill, Texas Posts: 146 Thanks: 0 Thanked 0 Times in 0 Posts fergusonmichael's Truck Pics	i had 315s on factory wheels at one point with 2.5'' leveling kit. They rubb some on full lock. the tires only measured like 34something. I think with spacers an 10in wide rims you will be rubbing everywhere. just my .02cents. __________________ *2007 2500 QuadCab 4x4 5.9L 48RE* s&b intake, cfm, 5in mbrp exhaust, airdog 100, diablo predator, isspro boost, pyro, fuel, rail & trans. 2.5in skyjacker leveling kit, 17x9 xd addict black 35s cooper st