stock height 35s?

[torturekilla]

ive tried searching and couldnt find a anwser to if you can clear 35x12.5 on stock height no lvling kit . im gonna run them on stock rims... im bout to buy new tires once my taxes come running in.... just need to know if a 35 will fit.. even if it rubs a bit i can stand that just dont wanna rip parts off while doing 70

__________________
2007 dodge quad cab 4x4, auto, 8 foot bed, slt, thunderroad package, 6.7l , 68re, 3.73, xtreme mt's 37, 6" superlift, 5100s, dual bilstein SS,westin bullbar,cobra NW ST

[upinsmoke53020]

I think you will have a chance of rippin parts off at 70. I have stock suspension with 33X12.5 and they rub. A lot! I wouldn't recomend any bigger than that.

__________________
99 Dodge Ram 2500, 5-speed, Edge Hot Juice w/attitude, RV275's, 4" turbo back exhaust, BHAF, Pro Comp M/T 33X12.50R17, Leveled, AIRDOG 150, Boost, Pyro pillar guages.

[zhertel]

Hey i don't know so much about the 07's but i put 35's on stock rims on my 2002 2500 ram the only thing i had to do was box in my control ams so that they wouldn't rub real bad... we have an 08 at work and we put them on the front too just to see what it looked like but i didn't go for a spin

[upinsmoke53020]

Sorry I didn't realize you had an 07. Not sure how that would compare to mine

__________________
99 Dodge Ram 2500, 5-speed, Edge Hot Juice w/attitude, RV275's, 4" turbo back exhaust, BHAF, Pro Comp M/T 33X12.50R17, Leveled, AIRDOG 150, Boost, Pyro pillar guages.

[Fastang07]

I have 35's on my stockers and they barely clear by about an inch both ways. I would guess they will rub without a leveling kit. I would get a leveling kit to be on the safe side.

__________________
07 2500 5.9L QC SB Electric Blue Pearl: 4" TB Silverline, Brute Force, GlowShift's, 4.5" Fabtech, 35" Cooper STT's, Rhino Liner, H.I.D.'s, 25% Tint, Sony CDX, 2200w Xplod's, JL 300/2www.myspace.com/kevinhooks
FOR SALE!!!!!

[TAPMAN]

They will definately rub. My 34,s almost rubbed.

__________________
2004.5. Leveled, K&N Intake, Diablosport tuner, isspro gauges, firestone bags, Procomp extreme wheels with Procomp 33 mudders, 4 inch"Straight" exhaust and a go fast 1/2 ton tailgate spoiler.

[Redneck Ram]

I can rub my 35's off roadin. That's with 4.5" lift. Agree with Fastang07, atleast a leveling kit and no hard off roading.

__________________
2006 2500 B.H. Edition, Auto, 3.73's, 4.5" Tuff Country, Bilstein 5100'S, BW Flares, Rhino, Exhaust-straight out, 5" Silverline tip, S&B Filter, Edge Juice/Att.,35" Nitto Mud Grapplers, Tint 20%. NRA and North American Hunting Club LIFE MEMBER

[D Gandy]

Ok, just gonna throw this one out there for ya. I bought a used set of 37x12.5 BFG AT's a few days ago and had them installed on my stock wheels yesterday. NO lift, stock suspension. I havn't been offroad yet just normal driving, the only rub is on the control arms! I have some pics I took this morning, but bad lighting really can't tell anything about them. I am sure that I would need the leaving kit for anything other than an all-terrain, but these tire fit my '06 with no rub. I am pretty sure that on stock wheels, control arm rub is gonna an issue with anything over 35"

__________________
2006 2500 4x4 auto 4-door,straight pipe, airaid intake, predator/powerpuck,boost fooler,Autometer boost,tranny,EGT gauges with A-pillar pod,Banks High Ram elbow,Winspeed heater grid delete,35x12.5x20 mud grappler, Kore Chase 2.0

[whiterocket5.9]

i have 35X12.50-17 nitto mudders on my 05 they rub when the wheel is cranked but i have never hit a bump or anything and had em hit...no body damage here i like em

__________________
05 dodge 2500 4x4 quad cab sb srw 5.9, 6-speed, 3.73,airaid intake, and 4"free flowin exauhst, p-pup, 35" xtmt procomps

[cumminsharderthanu]

Originally Posted by D Gandy

Ok, just gonna throw this one out there for ya. I bought a used set of 37x12.5 BFG AT's a few days ago and had them installed on my stock wheels yesterday. NO lift, stock suspension. I havn't been offroad yet just normal driving, the only rub is on the control arms! I have some pics I took this morning, but bad lighting really can't tell anything about them. I am sure that I would need the leaving kit for anything other than an all-terrain, but these tire fit my '06 with no rub. I am pretty sure that on stock wheels, control arm rub is gonna an issue with anything over 35"

def throw some pics up i think this would look bad###

__________________
2K6 Dodge 2500HD Quad Cab 4x4 5.9L,
AirAid Intake, Diablo Sport Predator, Quadzilla Boost Fooler, 5" DIAMOND EYE TBE, Silencer Ring and Intake Tube Gutted 33x13.50R20 MT ATZ 20x10 KMC XD Monsters, Leveling kit

[rab38]

I have 35 12.50's on my 05 and they do not rub. They only will rub the control arms when turned to full lock and it is not even that bad. No rubbing of the fenders what so ever

__________________
05 2500, Auto, 4x4, 4.10's,35" Mud terrains on stock wheels, HTS BuiltTrans,Smarty TNT R, SP Boost Fooler, MBRP muffler and delete pipe, 90hp ddp inj, hx40-3b twins Faassst.....

[D Gandy]

Originally Posted by cumminsharderthanu

def throw some pics up i think this would look bad###

I will get some pics up tomorrow maybe, nothing rain here today and overcast. Pics I got didn't really tell much cause it was to dark out. Like I said, deffinately wouldn't be able to run a mud terrain of any kind without the leeing kit, but the all-terrain bfg was a perfect fit.

__________________
2006 2500 4x4 auto 4-door,straight pipe, airaid intake, predator/powerpuck,boost fooler,Autometer boost,tranny,EGT gauges with A-pillar pod,Banks High Ram elbow,Winspeed heater grid delete,35x12.5x20 mud grappler, Kore Chase 2.0