Wheel dims for 35's w/ 2" level

libeachbum · 01-28-2008, 02:49 PM

Looking for some black wheels to run 35s on my truck with 2" leveling kit. My buddy's running the stock wheels with no rubbing. What kinda backspacing should I look for, most aftermarket wheels are like 4.5" backspace. Will they rub? Other option is to get the stock wheels powdercoated, but will probably cost just as much as new wheels.

__________________
2007 2500 QC 6.7, 2" level, 35" bfg's, things have started falling off...literally
BEWARE OF BADP/MAXIMUM PERFORMANCE

Howling1 · 01-28-2008, 06:55 PM

4.5" will rub.Maybe powdercoat a set of H2's they are about perfect for our trucks.17x8.5 with 5.5" of backspacing.

Check out this thread-
H2 Wheels

I know that there are some pics of black H2's out there.

Found some-Anyone w/ black H2 wheels and 315's have a pic? - Dodge Diesel - Diesel Truck Resource Forums

__________________
2006 CTD/Auto 4X4 QC LWB Mineral Gray Sport,35" Toyo M/T,HTS Billet trans,A5K,Big EH Sticks,Dual CP3's Hamilton Springs and Pushrods,MBRP,SmartyTNT-R,MP-8,Dipricol
http://community.webshots.com/user/h...host=community

Last edited by Howling1 : 01-28-2008 at 07:05 PM.

jp8819 · 01-28-2008, 09:57 PM

how bad do 4.5s rub just curious if it is bad or just a little bit that you can live with.

__________________
99 Reg cab 2500 5spd, ad100, 5"ex, smarty revo,TST , guages, Valair 13" ofe, Mach 5, 62/71/14, 491.43 hp 964.04 uncorrected western nc dyno day.

libeachbum · 01-29-2008, 11:20 AM

I'm not too crazy about the H2 wheels. So to be clear, 4.5 backspace will rub, but 5.5 is ok? Anybody know who makes wheels in 5.5 backspace?

__________________
2007 2500 QC 6.7, 2" level, 35" bfg's, things have started falling off...literally
BEWARE OF BADP/MAXIMUM PERFORMANCE

BODOMRAM07 · 01-29-2008, 11:39 AM

i was confused too, the wheel that i want is the Pro Comp 7089 in 17 x 9, the only backspacing available on their website is 4.75 with -6mm offset, i dont what this offset mean and also i'm not sure if they will rubbed..........

__________________
2007 Dodge QC, SB, 4X4, 5.9, 48RE, Flame Red, 2" Top Gunz, 315s BF A/T-KO,Eagle Alloys 17 x 9, Magnaflow 5" , Injen Air Intake, Power Puck, Diesel Manor 3-gauge pillar kit (Pyro, Boost, Trans), in the process of removing all the chrome.........

01-28-2008, 02:49 PM	#1 (permalink)
libeachbum Diesel Freak Join Date: Dec 2007 Location: New York Posts: 528 Thanks: 1 Thanked 1 Time in 1 Post libeachbum's Truck Pics	Wheel dims for 35's w/ 2" level Looking for some black wheels to run 35s on my truck with 2" leveling kit. My buddy's running the stock wheels with no rubbing. What kinda backspacing should I look for, most aftermarket wheels are like 4.5" backspace. Will they rub? Other option is to get the stock wheels powdercoated, but will probably cost just as much as new wheels. __________________ 2007 2500 QC 6.7, 2" level, 35" bfg's, things have started falling off...literally BEWARE OF BADP/MAXIMUM PERFORMANCE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

01-28-2008, 06:55 PM	#2 (permalink)
Howling1 Cummins Fan Join Date: Oct 2006 Location: Northern,IL Posts: 95 Thanks: 0 Thanked 2 Times in 2 Posts Howling1's Truck Pics	4.5" will rub.Maybe powdercoat a set of H2's they are about perfect for our trucks.17x8.5 with 5.5" of backspacing. Check out this thread- H2 Wheels I know that there are some pics of black H2's out there. Found some-Anyone w/ black H2 wheels and 315's have a pic? - Dodge Diesel - Diesel Truck Resource Forums __________________ 2006 CTD/Auto 4X4 QC LWB Mineral Gray Sport,35" Toyo M/T,HTS Billet trans,A5K,Big EH Sticks,Dual CP3's Hamilton Springs and Pushrods,MBRP,SmartyTNT-R,MP-8,Dipricol http://community.webshots.com/user/h...host=community Last edited by Howling1 : 01-28-2008 at 07:05 PM.

01-28-2008, 09:57 PM	#3 (permalink)
jp8819 Cummins Nut Join Date: Oct 2006 Location: Greensboro Posts: 450 Thanks: 3 Thanked 2 Times in 2 Posts jp8819's Truck Pics	how bad do 4.5s rub just curious if it is bad or just a little bit that you can live with. __________________ 99 Reg cab 2500 5spd, ad100, 5"ex, smarty revo,TST , guages, Valair 13" ofe, Mach 5, 62/71/14, 491.43 hp 964.04 uncorrected western nc dyno day.

01-29-2008, 11:20 AM	#4 (permalink)
libeachbum Diesel Freak Join Date: Dec 2007 Location: New York Posts: 528 Thanks: 1 Thanked 1 Time in 1 Post libeachbum's Truck Pics	I'm not too crazy about the H2 wheels. So to be clear, 4.5 backspace will rub, but 5.5 is ok? Anybody know who makes wheels in 5.5 backspace? __________________ 2007 2500 QC 6.7, 2" level, 35" bfg's, things have started falling off...literally BEWARE OF BADP/MAXIMUM PERFORMANCE

01-29-2008, 11:39 AM	#5 (permalink)
BODOMRAM07 Cummins Fanatic Join Date: Aug 2007 Location: Quebec, Canada Posts: 156 Thanks: 0 Thanked 0 Times in 0 Posts BODOMRAM07's Truck Pics	i was confused too, the wheel that i want is the Pro Comp 7089 in 17 x 9, the only backspacing available on their website is 4.75 with -6mm offset, i dont what this offset mean and also i'm not sure if they will rubbed.......... __________________ 2007 Dodge QC, SB, 4X4, 5.9, 48RE, Flame Red, 2" Top Gunz, 315s BF A/T-KO,Eagle Alloys 17 x 9, Magnaflow 5" , Injen Air Intake, Power Puck, Diesel Manor 3-gauge pillar kit (Pyro, Boost, Trans), in the process of removing all the chrome.........