Welcome to the Dodge Cummins Diesel Forum, the fastest growing Dodge Diesel Community on the internet.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us
What are the spec's for fitting H2 rims to an 03 4x4 Ram? I have read where they have to be machined. My question is what to tell the machinist for specs? Also, I have been hesitant on doing different rims, because I don't want them to stick out beyond what my stockers with 285/70/17's already do, so anybody with a 3rd gen and H2 rims please let me know---pictures would be great too! Thanks-
I just used a 1/2 variable speed router with a carbide cutter and guide bearing.About 2 minutes per wheel tops.
Not my truck but these are h2 wheels on Seans truck.I beleive they have something like 1/2 less backspacing than oems
Bob
__________________
05 2500 4x4 Carli Dominator 3.0 Suspension Baja proven
94 2500 4x4 Carli performance 2.0 with full leafs
90 wrangler injected locked and caged crawler
jtnm, thanks for the reply. The links in your signature show some great pictures...both trucks look really good!! But, I can't get the H2 mod link or your other pictures link to work...I have been watching e-bay h2 rims, Where did you get yours?
Thanks Heckuvatrk for the compliements on my trucks!
I got mine from guy at work, 5 wheels & tires for $500 bucks. The guy had to have the bling bling wheels on his hummer. They only had less 500 miles on them, then I sold the BFG ATs to my Dad for $600 which the extra $100 paid for the machining. So in a nutshell I got mine for FREE . I am not sure which tire I am going to run yet. I need something more agressive than an AT. So for now factory Michelins, I got 2 more months before I need to have some mudders, hunting season will be starting. Although I am really leaning towards the Interco TrXus since they have been proven in the past out here where I am to work very good in the mud & snow, from first hand experience and they look cool too. I am also going to get my H2s powder coated black maybe flat or matte finish.
Sorry about that try this link again this should work now2004 Dodge Ram 2500 4x4 H2 Wheel Mod and Install
__________________
07 2500 QC SLT SB 4x4 6-Speed G56 3.73 Lorenz 2.25 with DP Leafs 2.25 Truck Pictures
05 3500 QC SLT LB 4X4 6-Speed 3.73s Lorenz 2.5 Sway-A-way System with 3" IR Coils
35X12.50 BFG Muds Triple Dog & Outlook 2.5 Truck Pictures
If you have any kind of a lift on a pickup you need to have the wheels stick out a bit, other wise it looks like a fat lady with small shoes. Especially with a big front bumper.
If you have any kind of a lift on a pickup you need to have the wheels stick out a bit, other wise it looks like a fat lady with small shoes. Especially with a big front bumper.
I don't agree
Bob
__________________
05 2500 4x4 Carli Dominator 3.0 Suspension Baja proven
94 2500 4x4 Carli performance 2.0 with full leafs
90 wrangler injected locked and caged crawler
I have been looking around at different tires for my stock 17"x7.5" rims and was thinking about the Cooper STT's in a 285 or 295 size. 295 is pushin it size wise.
Then I read this thread on H2 wheels, and about finding them on Craigs list for cheap. So I went to Craigs list and what do you think was the 5th post down? 5 H2 rims, 4 BFG AT's with 20,000 miles and the spare which has never been on the ground for $350.00! :thumbsup
Needless to say they are in my garage and will be machined and mounted on the truck within the next week.
Thanks for the tip guys!!
Bob
__________________
Debadged Deep Molten Red 04.5 2500ST, 325/600, 48 RE, 373's, gauges, Smarty Revo, line-X, Buckstop, Warn 16.5, H2 rims w/315's, EMS hubs...
Bob, I completely agree with you. I think that your truck is one of the best looking I have seen on this forum! I just like stock wheels with tall, wider tires. It gives them a good 'lip'. What are the dimensions on stock wheels like yours in this pic? Id like to pick up a set like that and put some 35s on.
Anytime I run a 33x12.5, or a 35x12.5, they are on a 8in MAX wheel. I hate anything wider than 8wide.
__________________
1996 12valve, Auto, single cab, 2in pucks in front, rollin on 305's. BHAF, straight piped. EGT, Boost, and Tranny temp guages.
HELL NO IT AINT GOT A HEMI!
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
. I am not sure which tire I am going to run yet. I need something more agressive than an AT. So for now factory Michelins, I got 2 more months before I need to have some mudders, hunting season will be starting. Although I am really leaning towards the Interco TrXus since they have been proven in the past out here where I am to work very good in the mud & snow, from first hand experience and they look cool too. I am also going to get my H2s powder coated black maybe flat or matte finish. 
Linear Mode
